OEM 2006 Cadillac DTS Antenna Cable

2006 Cadillac DTS Antenna Cable Parts Questions & Experts Answers

• Q: How to replace the Antenna Cable for the cellular telephone with RPO Code UE1 on 2006 Cadillac DTS?

  A: The replacement of the cellular telephone coaxial cable with RPO Code UE1 starts with removing rear seat back, rear shelf panel and right rear sail panel and sound deadening foam from the right vehicle side. Release the coaxial cable from both the inner antenna coupling and rear defogger electrical connector before taking out the rear defogger ground/coaxial cable hold down fastener and the coaxial cable wire hold down. Proceed by disconnecting the coaxial cable from VCU then take away trunk side trim from right vehicle aspect to extract the coaxial cable into the rear storage area. Record the coaxial cable direction which will aid reassembly before gently removing electrical tape from the wiring harness and extracting the coaxial cable. Install the coaxial cable to its wiring harness location while re-taping it with proper cable pathway into the passenger space. Insert the coaxial cable into the VCU along with the rear defogger electrical connector while connecting the interior antenna coupling to the coaxial cable end. Fitted the wire hold retainer alongside the rear defroster ground/coaxial cable hold down fastener while tightening it to 1.6 N.m (14 lb in). The sound deadening foam along with trunk side trim, sail panel, rear shelf panel, and rear seat back forms the final steps for completion.