How to replace the hazard and turn signal flasher on 2006 Cadillac SRX?

To replace the hazard and turn signal flasher, remove the driver side I/P closeout/Insulator panel, then take off the flasher module from the I/P carrier and disconnect the electrical connector. For installation, connect the electrical connector to the flasher module, slide the retaining clip onto the I/P carrier, and reinstall the panel.

OEM 2006 Cadillac SRX Turn Signal Flasher

Turn Signal Indicator Flasher

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Turn Signal Flasher found

View related parts
2006 Cadillac SRX Flasher Relay Part Number: 25718722
Product Specifications
- Other Name: Flasher, Hazard Lamp & Turn Signal Lamp; Flasher; Flasher, Chassis/Body Marker/Hazard
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.2 x 2.9 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25718722
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

2006 Cadillac SRX Turn Signal Flasher

With a comprehensive array of OEM 2006 Cadillac SRX Turn Signal Flasher, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Cadillac SRX Turn Signal Flasher are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Cadillac SRX Turn Signal Flasher Parts and Q&A

Q: How to replace the hazard and turn signal flasher on 2006 Cadillac SRX?
A: To replace the hazard and turn signal flasher, remove the driver side I/P closeout/Insulator panel, then take off the flasher module from the I/P carrier and disconnect the electrical connector. For installation, connect the electrical connector to the flasher module, slide the retaining clip onto the I/P carrier, and reinstall the panel.