How to replace the ignition coil for Bank 2 on 2006 Cadillac SRX?

The first step for changing the Ignition Coil for bank 2 is to turn the ignition off and take off the engine cover. If it's the Ignition Coil for cylinder 2 you need to replace, first remove the air cleaner duct from the Throttle Body and disconnect the pcv hose on the right bank camshaft cover, and then take out the Intake Manifold bolts without separ following this, loosen and remove the brake bolts and brace, then set the upper Intake Manifold and the lower Intake Manifold close enough together to give enough space for Ignition Coil removal, but be careful not to disconnect any fuel pipes or hoses. After that, unplug the Ignition Coil electrical connector(s), then take out the Ignition Coil bolt(s) and Ignition Coil(s). After installation, put each Ignition Coil in its spot, tighten the bolt to 10 n.m (89 lb in), and join the Ignition Coil electrical connector(s) to the coil(s). Should it be needed, put the upper Intake Manifold back in.

OEM 2006 Cadillac SRX Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Ignition Coils found

View related parts
2006 Cadillac SRX Spark Plug
Part Number: 19418102
$91.46 MSRP: $187.96
You Save: $96.50 (52%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition; Ignition Coil; Coil, Ignition Coil
- Replaces: 12583514, 12613057, 12629037
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.9 x 3.9 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19418102
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2006 Cadillac SRX Ignition Coil
Part Number: 89017778
$229.42 MSRP: $424.46
You Save: $195.04 (46%)
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Ignition Control Module; Ignition Module; Coil Assembly; Coil, Ignition Coil
- Replaces: 12585765
- Item Weight: 4.30 Pounds
- Item Dimensions: 18.5 x 10.5 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89017778
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac SRX Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2006 Cadillac SRX Ignition Coil
Part Number: 12670154
$54.32 MSRP: $101.99
You Save: $47.67 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly-Ignition; Coil, Ignition Coil
- Replaces: 12594176
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.4 x 4.6 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 8
- SKU: 12670154
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac SRX Submodels:
- Base | 8 Cyl 4.6 L GAS

2006 Cadillac SRX Ignition Coil

With a comprehensive array of OEM 2006 Cadillac SRX Ignition Coil, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Cadillac SRX Ignition Coil are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Cadillac SRX Parts Questions & Experts Answers

Q: How to replace the ignition coil for Bank 2 on 2006 Cadillac SRX?
A: The first step for changing the Ignition Coil for bank 2 is to turn the ignition off and take off the engine cover. If it's the Ignition Coil for cylinder 2 you need to replace, first remove the air cleaner duct from the Throttle Body and disconnect the pcv hose on the right bank camshaft cover, and then take out the Intake Manifold bolts without separ following this, loosen and remove the brake bolts and brace, then set the upper Intake Manifold and the lower Intake Manifold close enough together to give enough space for Ignition Coil removal, but be careful not to disconnect any fuel pipes or hoses. After that, unplug the Ignition Coil electrical connector(s), then take out the Ignition Coil bolt(s) and Ignition Coil(s). After installation, put each Ignition Coil in its spot, tighten the bolt to 10 n.m (89 lb in), and join the Ignition Coil electrical connector(s) to the coil(s). Should it be needed, put the upper Intake Manifold back in.