How to replace the Knock Sensor (KS) for Bank 2 on 2006 Cadillac SRX?

To replace the Knock Sensor (KS) for Bank 2, one should remove and lift and support the vehicle with all the ignition OFF. Detach the wiring harness heat shield from the oil level indicator tube to have accessibility, then disconnect the KS electrical connector. Next, remember KS bolt and remove the KS. To install, locate the new KS and apply KS bolt and tighten it up to 23 N.m (17 lb ft) as per the Fastener Notice in Service Precautions. Reconnect KS electrical connector and reinstall the Wiring Harness Heat Shield onto oil level indicator tube before bringing the car down.

OEM 2006 Cadillac SRX Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
2006 Cadillac SRX Knock Sensor
Part Number: 12618603
$37.07 MSRP: $69.61
You Save: $32.54 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Ignition Knock (Detonation) Sensor
- Replaces: 12566845
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.6 x 2.6 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12618603
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2006 Cadillac SRX Knock Sensor
Part Number: 12567446
$26.64 MSRP: $50.00
You Save: $23.36 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Replaced by: 19434672
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.7 x 2.2 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12567446
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Cadillac SRX Submodels:
- Base | 8 Cyl 4.6 L GAS

2006 Cadillac SRX Knock Sensor

With a comprehensive array of OEM 2006 Cadillac SRX Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Cadillac SRX Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Cadillac SRX Parts Questions & Experts Answers

Q: How to replace the Knock Sensor (KS) for Bank 2 on 2006 Cadillac SRX?
A: To replace the Knock Sensor (KS) for Bank 2, one should remove and lift and support the vehicle with all the ignition OFF. Detach the wiring harness heat shield from the oil level indicator tube to have accessibility, then disconnect the KS electrical connector. Next, remember KS bolt and remove the KS. To install, locate the new KS and apply KS bolt and tighten it up to 23 N.m (17 lb ft) as per the Fastener Notice in Service Precautions. Reconnect KS electrical connector and reinstall the Wiring Harness Heat Shield onto oil level indicator tube before bringing the car down.

Related 2006 Cadillac SRX Parts

Alternate Year Models

2005 Cadillac SRX Knock Sensor 2007 Cadillac SRX Knock Sensor