How to replace the muffler on RPOs LE5/LSJ on 2006 Chevrolet Cobalt?

You must first support and lift the vehicle for rpos le5/lsj Muffler replacement work. The exhaust and tailpipe cutter (SA9168NE) should be used to cut the exhaust Muffler pipe at the front weld location ahead of the weld. Afterward the support the exhaust Muffler. Begin by removing the Muffler insulator from its position on the underbody hanger and proceed to remove the exhaust Muffler. Follow this step by cleaning up the Muffler pipe end through deburring when needed. Put the Muffler inlet pipe onto the Muffler pipe before installing the Muffler insulator to the underbody hanger. Position the service Muffler clamp on the Muffler inlet pipe at a distance of 19 mm (3/4 inch) from the edge of the inlet while2156 aligning the clamp nuts to face away from the evaporative emission (EVAP) canister. Place the Muffler against the vehicle underbody and rear bumper fascia while you maintain its position by tightening the exhaust clamp nuts to 45 nm (33 ft. Lbs.). Finally, lower the vehicle.

OEM 2006 Chevrolet Cobalt Muffler

Exhaust Muffler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Mufflers found

View related parts
2006 Chevrolet Cobalt Muffler
Part Number: 15283438
$629.47
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler, Exhaust; Muffler, Exhaust Tail Pipe
- Item Weight: 14.50 Pounds
- Item Dimensions: 37.9 x 15.5 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15283438
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS
View related parts
2006 Chevrolet Cobalt Muffler
Part Number: 15283439
Product Specifications
- Other Name: Muffler, Exhaust; Muffler, Exhaust Tail Pipe
- Item Weight: 38.50 Pounds
- Item Dimensions: 35.0 x 14.9 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15283439
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2006 Chevrolet Cobalt Muffler
Part Number: 15283437
Product Specifications
- Other Name: Muffler, Exhaust; Muffler, Exhaust Tail Pipe
- Item Weight: 15.80 Pounds
- Item Dimensions: 36.8 x 15.1 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15283437
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS

2006 Chevrolet Cobalt Muffler

With a comprehensive array of OEM 2006 Chevrolet Cobalt Muffler, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Cobalt Muffler are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Cobalt Muffler Parts Questions & Experts Answers

Q: How to replace the muffler on RPOs LE5/LSJ on 2006 Chevrolet Cobalt?
A: You must first support and lift the vehicle for rpos le5/lsj Muffler replacement work. The exhaust and tailpipe cutter (SA9168NE) should be used to cut the exhaust Muffler pipe at the front weld location ahead of the weld. Afterward the support the exhaust Muffler. Begin by removing the Muffler insulator from its position on the underbody hanger and proceed to remove the exhaust Muffler. Follow this step by cleaning up the Muffler pipe end through deburring when needed. Put the Muffler inlet pipe onto the Muffler pipe before installing the Muffler insulator to the underbody hanger. Position the service Muffler clamp on the Muffler inlet pipe at a distance of 19 mm (3/4 inch) from the edge of the inlet while2156 aligning the clamp nuts to face away from the evaporative emission (EVAP) canister. Place the Muffler against the vehicle underbody and rear bumper fascia while you maintain its position by tightening the exhaust clamp nuts to 45 nm (33 ft. Lbs.). Finally, lower the vehicle.