OEM 2006 Chevrolet Equinox Battery Cable

2006 Chevrolet Equinox Battery Cable Parts and Q&A

• Q: How to replace the positive battery cable on 2006 Chevrolet Equinox?

  A: You should begin the positive Battery Cable replacement process by taking away the battery along with the underhood fuse block cover. Remove the uhfb positive Battery Cable nut followed by taking out the cable from its uhfb position. First disconnect the Battery Cable retainers from the battery tray before taking away the battery box. The Starter Solenoid maintenance begins by taking off the positive battery terminal nut and cutting the positive Battery Cable connection from the Starter Solenoid. Remove the positive Battery Cable from the wire loom as well during the installation process. Start by placing the positive Battery Cable into the wire loom and fix its termination on the Starter Solenoid. Fasten the positive battery terminal nut onto the Starter before tightening it to 10 n.m (89 lb ft). The Battery Cable retainers must be attached to the battery tray along with the battery box installation. Secure the positive Battery Cable onto the uhfb with the provided positive Battery Cable nut which needs tightening up to 15 n.m (11 lb ft). The last step involves reattaching the uhfb cover followed by returning the battery to its original location.