OEM 2006 Chevrolet Impala Coolant Reservoir

2006 Chevrolet Impala Coolant Reservoir Parts Questions & Experts Answers

• Q: How to replace the Coolant Reservoir (RPO LS4) on 2006 Chevrolet Impala?

  A: To replace a coolant recovery reservoir (RPO LS4), remove the front fender upper diagonal brace firstly. Next move the coolant recovery reservoir hose clamp out of the way and disconnect the coolant recovery reservoir hose from the radiator overflow hose at the radiator overflow fitting. Remove the coolant recovery reservoir nuts off the shock tower studs and export the reservoir out of the lower retainer and shock tower studs. Drain out the coolant from the reservoir into another clean container. For installation, replace this coolant recovery reservoir to the lower retainer and shock tower studs then tighten nuts to lower retainer shock tower studs to sturdiness of 3.3 nm (29 Inch lbs.). Lubricate the tank hose with clean water while connecting it to the radiator overflow hose ensuring that the reservoir hose clamp is in the right position at the radiator overflow hose fitting. Reinstall front fender upper diagonal brace and fill up to the coolant recovery reservoir to proper levels.