How to replace the exhaust heat shield for the catalytic converter on 2006 Chevrolet Monte Carlo?

To replace the Catalytic Converter heat shield one has to remove the Catalytic Converter first. Then, disconnect the heated oxygen sensor (HO2S) wiring harness from the clips on the catalytic heater shield. Drill out the rivets holding the heat shield and then take it out. From installation, align the new Catalytic Converter heat shield to the underbody and install new comments of Catalytic Converter heat shield rivets. Reconnect the use of the harness to the clips on the heat shield, and finally, reattach the catalytic convertor.

OEM 2006 Chevrolet Monte Carlo Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Exhaust Heat Shields found

View related parts
2006 Chevrolet Monte Carlo Heat Shield, Passenger Side
Part Number: 12569052
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Item Weight: 1.50 Pounds
- Item Dimensions: 21.0 x 8.0 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12569052
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- SS | 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Monte Carlo Heat Shield
Part Number: 12612663
Product Specifications
- Other Name: Shield, Exhaust Pipe; Exhaust Heat Shield
- Position: Upper
- Item Weight: 1.30 Pounds
- Item Dimensions: 23.7 x 7.4 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12612663
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- LS, LT, LTZ | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2006 Chevrolet Monte Carlo Heat Shield, Driver Side
Part Number: 12569051
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Item Weight: 1.90 Pounds
- Item Dimensions: 17.0 x 10.4 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12569051
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- SS | 8 Cyl 5.3 L GAS
View related parts
2006 Chevrolet Monte Carlo Heat Shield, Driver Side
Part Number: 12586678
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Item Weight: 1.10 Pounds
- Item Dimensions: 15.3 x 9.3 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12586678
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- LS, LT, LTZ | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2006 Chevrolet Monte Carlo Heat Shield, Passenger Side
Part Number: 12577722
Product Specifications
- Other Name: Shield, Exhaust Manifold; Exhaust Heat Shield
- Position: Passenger Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 18.5 x 11.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12577722
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Monte Carlo Submodels:
- LS, LT, LTZ | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

2006 Chevrolet Monte Carlo Exhaust Heat Shield

With a comprehensive array of OEM 2006 Chevrolet Monte Carlo Exhaust Heat Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Monte Carlo Exhaust Heat Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Monte Carlo Parts Questions & Experts Answers

Q: How to replace the exhaust heat shield for the catalytic converter on 2006 Chevrolet Monte Carlo?
A: To replace the Catalytic Converter heat shield one has to remove the Catalytic Converter first. Then, disconnect the heated oxygen sensor (HO2S) wiring harness from the clips on the catalytic heater shield. Drill out the rivets holding the heat shield and then take it out. From installation, align the new Catalytic Converter heat shield to the underbody and install new comments of Catalytic Converter heat shield rivets. Reconnect the use of the harness to the clips on the heat shield, and finally, reattach the catalytic convertor.