How to replace the exhaust heat shield for the catalytic converter on Chevrolet Monte Carlo?

Properly raising the vehicle for maintenance work is necessary before you can replace the Catalytic Converter heat shield. Safety measures mentioned in the Catalytic Converter movement notice must be understood when performing service. Lean and secure the exhaust framework before you detach the Catalytic Converter. Begin the replacement of the heat shield by unplugging the heated Oxygen Sensor (H02S) wiring harness from the Catalytic Converter and then remove the rivets that secure the heat shield before finally removing it. Secure the new Catalytic Converter heat shield into position by using rivets for installation. Connect the heated Oxygen Sensor (H02S) wiring harness to the Catalytic Converter heat shield and reinstall the Catalytic Converter. Lower the vehicle and check the exhaust system for leaks after removing the support that holds the system.

OEM Chevrolet Monte Carlo Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

24 Exhaust Heat Shields found

View related parts
Chevrolet Monte Carlo Heat Shield, Front Part Number: 10293107
$6.56 MSRP: $11.10
You Save: $4.54 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield-Exhaust Pipe Front Heat; Exhaust Heat Shield; Shield, Exhaust Pipe
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Heat Shield Part Number: 10152257
$3.24 MSRP: $9.34
You Save: $6.10 (66%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Exhaust Pipe; Exhaust Heat Shield
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Heat Shield, Driver Side Part Number: 12568407
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Exhaust Manifold Heat Shield; Manifold Heat Shield; Upper Shield; Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Replaces: 10182323
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Heat Shield Part Number: 10056727
Product Specifications
- Other Name: Shield, Exhaust Tail Pipe; Exhaust Heat Shield
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Monte Carlo | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Heat Shield Part Number: 10230159
Product Specifications
- Other Name: Shield, Catalytic Converter; Exhaust Heat Shield
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Monte Carlo | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Heat Shield Part Number: 24506492
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Manifold Heat Shield; Lower Shield; Shield; Shield, Exhaust Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2003 Chevrolet Monte Carlo | LS, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Heat Shield Part Number: 10276098
Product Specifications
- Other Name: Shield, Catalytic Converter; Exhaust Heat Shield; Converter Shield
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Heat Shield Part Number: 12612663
Product Specifications
- Other Name: Shield, Exhaust Pipe; Exhaust Heat Shield
- Position: Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Monte Carlo Heat Shield, Passenger Side Part Number: 24507616
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Manifold Heat Shield; Upper Shield; Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2003 Chevrolet Monte Carlo | LS, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Heat Shield, Driver Side Part Number: 24506490
Product Specifications
- Other Name: Shield, Exhaust Manifold; Exhaust Heat Shield; Manifold Heat Shield; Upper Shield; Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2003 Chevrolet Monte Carlo | LS, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car, Z34 | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Heat Shield Part Number: 10185151
Product Specifications
- Other Name: Shield, Catalytic Converter; Exhaust Heat Shield; Converter Shield
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Monte Carlo Manifold Heat Shield Part Number: 10244606
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Shield; Shield, Exhaust Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Monte Carlo Manifold Heat Shield, Driver Side Part Number: 24503520
Product Specifications
- Other Name: Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chevrolet Monte Carlo | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Manifold Heat Shield, Passenger Side Part Number: 24506183
Product Specifications
- Other Name: Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chevrolet Monte Carlo | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Heat Shield, Passenger Side Part Number: 12577722
Product Specifications
- Other Name: Shield, Exhaust Manifold; Exhaust Heat Shield
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Monte Carlo Heat Shield, Driver Side Part Number: 12586678
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Monte Carlo Manifold Heat Shield, Passenger Side Part Number: 10127598
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Shield; Shield, Exhaust Manifold
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Monte Carlo | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Manifold Heat Shield, Driver Side Part Number: 10162080
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Monte Carlo | Z34 | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Manifold Heat Shield Part Number: 10182326
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Shield; Shield, Exhaust Manifold
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Monte Carlo Heat Shield, Passenger Side Part Number: 24506294
Product Specifications
- Other Name: Shield, Exhaust Manifold; Exhaust Heat Shield; Exhaust Manifold Heat Shield; Manifold Heat Shield; Upper Shield; Shield
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS

| Page 1 of 2 |Next >

1-20 of 24 Results

Chevrolet Monte Carlo Exhaust Heat Shield

Want to cut long-term maintenance and repair costs? Choose OEM Exhaust Heat Shield. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Exhaust Heat Shield includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Monte Carlo Exhaust Heat Shield is one of the critical parts, which speaks for the dependability and power of the Chevrolet Monte Carlo series. This Exhaust Heat Shield is fitted with the intent of controlling thermal energy in the exhaust system; it also helps to insulate the exhaust and discharge exhaust gases rapidly. It not only increases exhaust flow performance but also decreases intake temperatures; therefore, increasing engine performance for different models of Chevrolet Monte Carlo. The Exhaust Heat Shield also works for various models of Monte Carlo with the V6 and V8 engines to guarantee all the model to receive the added protection of this part. Since one of the major threats of any working process is overheating, the Exhaust Heat Shield performs a crucial function of protecting significant components from being overheated, which increases both efficiency and safety. First, it is important to draw attention to the fact that Chevrolet Monte Carlo Exhaust Heat Shield has a very resistant framework and a metal casing which is the unchangeable standard in automotive industry by now. That is, the constant servicing of this element is necessary, since the defective Exhaust Heat Shield almost always scrapes on other elements, threatening the stability of the car. The Automobile Chevrolet Monte Carlo has been popular since 1969 to 2007, and it was a symbol of luxury and performance car and the Exhaust Heat Shield is one of the finest specimen which show the architectural brilliance of Chevrolet Monte Carlo.

Chevrolet Monte Carlo Exhaust Heat Shield Parts Questions & Experts Answers

Heat Shield, Driver Side
12568407
Q: How to replace the exhaust heat shield for the catalytic converter on Chevrolet Monte Carlo?
A:
Properly raising the vehicle for maintenance work is necessary before you can replace the Catalytic Converter heat shield. Safety measures mentioned in the Catalytic Converter movement notice must be understood when performing service. Lean and secure the exhaust framework before you detach the Catalytic Converter. Begin the replacement of the heat shield by unplugging the heated Oxygen Sensor (H02S) wiring harness from the Catalytic Converter and then remove the rivets that secure the heat shield before finally removing it. Secure the new Catalytic Converter heat shield into position by using rivets for installation. Connect the heated Oxygen Sensor (H02S) wiring harness to the Catalytic Converter heat shield and reinstall the Catalytic Converter. Lower the vehicle and check the exhaust system for leaks after removing the support that holds the system.