Make sure this part fits

GM 24506294
Heat Shield, Passenger Side

1996-2007 GM

Customer Questions & Expert Answers (22)
GM 24506294 Heat Shield, Passenger Side
  • Part Description
    Shield, Exhaust Manifold; Exhaust Heat Shield
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
    2005-2006 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS
    2000-2005 Chevrolet ImpalaBase6 Cyl 3.4 L GAS
    1998-2001 Chevrolet LuminaBase, LS, LTZ6 Cyl 3.1 L GAS
    1997-2003 Chevrolet MalibuBase, LS6 Cyl 3.1 L GAS
    1997-2005 Chevrolet Monte CarloLS, LS Competition, LS Sport6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
    2005-2006 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1999-2004 Oldsmobile AleroGL, GLS, GX6 Cyl 3.4 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 24506294 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 24506294 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after securing the new heat shield for the 2001 Buick Century? Posted by Customer
    A:
    Reattach the oxygen sensor wiring harness to the heat shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you install the new catalytic converter heat shield for the 2005 Buick Century? Posted by Customer
    A:
    Position the new heat shield and secure it with rivets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be removed after raising for the 2007 Buick Rendezvous? Posted by Customer
    A:
    Remove the resonator heat shield nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after installing the resonator heat shield for the 2006 Buick Rendezvous? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the process for installation of the new heat shield for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Attach the new heat shield using new rivets, reconnect the muffler to the catalytic converter, and then lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be removed after raising for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Remove the exhaust system muffler.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after installing the new heat shield for the 2006 Buick Terraza? Posted by Customer
    A:
    Reinstall the catalytic converter and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after installation for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the next step after raising the 2002 Chevrolet Monte Carlo? Posted by Customer
    A:
    Support the exhaust system and remove the catalytic converter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done before removing the catalytic converter for the 2003 Chevrolet Monte Carlo? Posted by Customer
    A:
    Support the exhaust system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the next step after reconnecting the oxygen sensor for the 2000 Chevrolet Impala? Posted by Customer
    A:
    Reinstall the catalytic converter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after reinstalling the heat shield for the 2001 Chevrolet Lumina? Posted by Customer
    A:
    Reinstall the three way catalytic converter and inspect the exhaust system for leaks and any underbody contact before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be noted regarding the catalytic converter for the 2000 Chevrolet Lumina? Posted by Customer
    A:
    It is important to note the Catalytic Converter Movement Notice in Service Precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you install the catalytic converter heat shield for the 2000 Chevrolet Lumina? Posted by Customer
    A:
    Attach the catalytic converter heat shield using the bolts and nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the converter heat shield for the 2001 Chevrolet Monte Carlo? Posted by Customer
    A:
    Raise and support the vehicle, ensuring to follow proper vehicle lifting procedures.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after raising the 2001 Chevrolet Venture? Posted by Customer
    A:
    Remove the catalytic converter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the final step after installation for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What is the first step to replace the exhaust heat shield for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after raising the 2003 Chevrolet Venture? Posted by Customer
    A:
    Remove the catalytic converter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    How do you remove the exhaust muffler heat shield for the 2005 Chevrolet Venture? Posted by Customer
    A:
    Use a drill to remove the rivets at the exhaust muffler heat shield, then take the exhaust muffler heat shield off the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    Q:
    What should be done after raising the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Remove the catalytic converter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Exhaust Heat Shield
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Heat Shield, Passenger Side 24506294 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 24506294 Heat Shield, Passenger Side is available in the market under the name GM Exhaust Heat Shield. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 24506294 Heat Shield, Passenger Side fits certain Chevrolet Malibu, Impala, Lumina models, as well as Buick Century, Rendezvous, Terraza. Additionally, it is compatible with Pontiac Grand Prix, Grand Am, Aztek and Oldsmobile Cutlass, Alero, Silhouette models.
The original GM component designated by manufacturer part number 24506294 maintains top performance when functioning as the Shield, Exhaust Manifold; Exhaust Heat Shield unit at its Passenger Side. The component 24506294 is constructed from durable material and its dimensions span 17.3 x 4.0 x 3.9 inches while weighing 1.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Exhaust Manifold Heat Shield; Manifold Heat Shield; Upper Shield; Shield. The part 24506294 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.