How to replace the rear wiper motor on 2006 Chevrolet Uplander?

In order to replace the rear Wiper Motor, remove the rear Wiper Arm and the rear Wiper Motor drive shaft nut then pull off the washer and seal from the Wiper Motor drive shaft. Secondly, take off the liftgate trim panel and replace its electrical connector with the rear Wiper Motor. After that loosen the screws holding down the rear Wiper Motor and pull the motor out of the liftgate and car. For installation, locate the rear Wiper Motor at the position of the liftgate and fasten with the screws, using the wrench, torquing to a 6 n.m (53 lb in). Then connect the electrical connector to the Wiper Motor, and mount the washer and seal to the rear Wiper Motor drive shaft, then the rear Wiper Motor drive shaft nut which should be tightened at 6 n.m (53 lb in). Last, replace the rear Wiper Arm, check the rear wiper to ensure proper operation, replace the liftgate trim panel.

OEM 2006 Chevrolet Uplander Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Motors found

View related parts
2006 Chevrolet Uplander Wiper Motor
Part Number: 20815337
$134.61 MSRP: $245.75
You Save: $111.14 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly-Windshield Wiper & Windshield Washer; Rear Motor; Motor, Rear Window Wiper/Washer
- Replaces: 15192152
- Item Weight: 2.20 Pounds
- Item Dimensions: 9.8 x 7.5 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20815337
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2006 Chevrolet Uplander Front Transmission
Part Number: 15192145
$238.87 MSRP: $375.85
You Save: $136.98 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Windshield Wiper System; Wiper Linkage; Transmission; Module, Windshield Wiper Motor
- Item Weight: 10.70 Pounds
- Item Dimensions: 62.9 x 10.5 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15192145
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2006 Chevrolet Uplander Wiper Motor
Part Number: 12335832
Product Specifications
- Other Name: Motor Assembly, Windshield Wiper; Windshield Wiper Motor; Front Motor; Motor, Windshield Wiper Motor
- Item Weight: 3.20 Pounds
- Item Dimensions: 8.1 x 5.4 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12335832
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2006 Chevrolet Uplander Wiper Motor

With a comprehensive array of OEM 2006 Chevrolet Uplander Wiper Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Uplander Wiper Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Uplander Parts Questions & Experts Answers

Q: How to replace the rear wiper motor on 2006 Chevrolet Uplander?
A: In order to replace the rear Wiper Motor, remove the rear Wiper Arm and the rear Wiper Motor drive shaft nut then pull off the washer and seal from the Wiper Motor drive shaft. Secondly, take off the liftgate trim panel and replace its electrical connector with the rear Wiper Motor. After that loosen the screws holding down the rear Wiper Motor and pull the motor out of the liftgate and car. For installation, locate the rear Wiper Motor at the position of the liftgate and fasten with the screws, using the wrench, torquing to a 6 n.m (53 lb in). Then connect the electrical connector to the Wiper Motor, and mount the washer and seal to the rear Wiper Motor drive shaft, then the rear Wiper Motor drive shaft nut which should be tightened at 6 n.m (53 lb in). Last, replace the rear Wiper Arm, check the rear wiper to ensure proper operation, replace the liftgate trim panel.