How to replace the front cross-member for the steering gear on 2007 Buick Rainier?

Vehicle support and elevation become necessary to replace the front steering gear crossmember. Start by detaching the mounting bolts that secure the engine shield and afterward remove the shield itself. The installation starts by disconnecting the rear lower Control Arm Bracket to frame mounting bolts and then moving on to the steering gear crossmember mounting bolts before removing the steering gear crossmember. The installation process starts with the steering gear crossmember but make sure to follow the fastener notice instructions. Fasten the steering gear crossmember mounting bolts at 50 n.m (37 lb ft). Secure the rear lower Control Arm Bracket to frame mounting bolts through proper torque of 240 n.m (177 lb ft). Reassemble the engine shield by installing its mounting bolts, which should be tightened to 20 n.m (15 lb ft). Afterward, lower the vehicle to completion.

OEM 2007 Buick Rainier Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Front Cross-Members found

View related parts
2007 Buick Rainier Transmission Support Part Number: 15090722
Product Specifications
- Other Name: Crossmember, Transmission Support; Transfer Case Mount; Transmission Mount; Trans Crossmember; Crossmember, Transmission Mounting
- Replaces: 15020364
- Item Weight: 10.90 Pounds
- Item Dimensions: 7.8 x 36.8 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15090722
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rainier Submodels:
- CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2007 Buick Rainier Front Crossmember Part Number: 15085421
Product Specifications
- Other Name: Crossmember, Intermediate (Transmission Support Cross Member); Crossmember; Crossmember, Intermediate(Transmission Support Cross Member)
- Item Weight: 11.10 Pounds
- Item Dimensions: 32.8 x 10.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15085421
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rainier Submodels:
- CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2007 Buick Rainier Front Cross-Member

With a comprehensive array of OEM 2007 Buick Rainier Front Cross-Member, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Rainier Front Cross-Member are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Rainier Front Cross-Member Parts and Q&A

Q: How to replace the front cross-member for the steering gear on 2007 Buick Rainier?
A: Vehicle support and elevation become necessary to replace the front steering gear crossmember. Start by detaching the mounting bolts that secure the engine shield and afterward remove the shield itself. The installation starts by disconnecting the rear lower Control Arm Bracket to frame mounting bolts and then moving on to the steering gear crossmember mounting bolts before removing the steering gear crossmember. The installation process starts with the steering gear crossmember but make sure to follow the fastener notice instructions. Fasten the steering gear crossmember mounting bolts at 50 n.m (37 lb ft). Secure the rear lower Control Arm Bracket to frame mounting bolts through proper torque of 240 n.m (177 lb ft). Reassemble the engine shield by installing its mounting bolts, which should be tightened to 20 n.m (15 lb ft). Afterward, lower the vehicle to completion.