How to replace the Rack and Pinion Boot on 2007 Buick Rainier?

To replace the rack and pinion boot, first, remove the outer tie rod and the rack and pinion gear. Replace all boot parts when replacing the inner tie rod. Discard the retaining clamps and pull off the old boot. Grease the new boot, install it, and secure with clamps. Reinstall the gear and tie rod.

OEM 2007 Buick Rainier Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack and Pinion Boot found

View related parts
2007 Buick Rainier Tie Rod Boot Part Number: 26089593
$77.64 MSRP: $123.27
You Save: $45.63 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder; Rack and Pinion Bellows; Boot.; Boot Kit; Boot; Boot Kit, Tie Rod End Dust
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.8 x 4.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26089593
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Rainier Submodels:
- CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2007 Buick Rainier Rack and Pinion Boot

With a comprehensive array of OEM 2007 Buick Rainier Rack and Pinion Boot, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Rainier Rack and Pinion Boot are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Rainier Rack and Pinion Boot Parts and Q&A

Q: How to replace the Rack and Pinion Boot on 2007 Buick Rainier?
A: To replace the rack and pinion boot, first, remove the outer tie rod and the rack and pinion gear. Replace all boot parts when replacing the inner tie rod. Discard the retaining clamps and pull off the old boot. Grease the new boot, install it, and secure with clamps. Reinstall the gear and tie rod.