Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Buick Terraza Cruise Control Switch

Steering Wheel Cruise Control Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Cruise Control Switch found

  • 2007 Buick Terraza Cruise Control Switch - 10394822
    2007 Buick Terraza Cruise Control Switch Diagram - 10394822
    View related parts

    2007 Buick Terraza Turn Signal Switch Part Number: 10394822

    Product Specifications
    • Other Name: Switch, Cruise Control Selector; Multi Purpose Switch; Cruise Switch; Switch
    • Item Weight: 1.00 Pounds
    • Item Dimensions: 6.4 x 3.3 x 3.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 10394822
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2007 Buick Terraza Submodels:
    • CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2007 Buick Terraza Cruise Control Switch

With a comprehensive array of OEM 2007 Buick Terraza Cruise Control Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Terraza Cruise Control Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Terraza Cruise Control Switch Parts and Q&A

  • Q: How to replace the cruise control switch on 2007 Buick Terraza?
    A: In order to replace the Cruise Control Switch, remove the Steering Wheel from the vehicle, withdraw the Steering Wheel electrical harness grounding screw and remove the electrical harness connector retainer clip from the Steering Wheel trim cover. Then, take out the screws from the steering rear trim cover that is followed by the Cruise Control Switch screws, along with the Steering Wheel trim cover. After that, remove the Cruise Control Switch. For installation, one can start by installing the Cruise Control Switch and then the Steering Wheel trim cover . Screw in the Cruise Control Switch to a torque of 6 n-m (53 lb in) and tighten the Steering Wheel rear trim cover screws torque to 6 n-m (53 lb in). Next, fasten on the Steering Wheel electrical harness grounding screw and tighten to 6 n.m (53 lb in). Connect the electrical harness connector retainer clip to the Steering Wheel trim cover, and lastly re-install or place back the Steering Wheel onto the car.

Related 2007 Buick Terraza Parts

Alternate Year Models

+
2006 Buick Terraza Cruise Control Switch