OEM 2007 Cadillac DTS Flywheel

2007 Cadillac DTS Parts Questions & Experts Answers

• Q: How to replace the engine flywheel on 2007 Cadillac DTS?

  A: The first step for engine Flywheel replacement requires transaxle removal before installing the Flywheel holder (J 44214) onto the engine block while loosening the Flywheel bolts. The replacement process begins by keeping only one single bolt fixed at the Crankshaft position. You should hold the engine Flywheel with your hand while taking out the remaining bolt. Avoid letting the Flywheel drop during this process. It is essential to inspect and cleanse the engine Flywheel before applying sealant to each of the Flywheel bolts. Install the engine Flywheel directly on the Crankshaft and utilize the Flywheel bolts to fasten it by first making a 30 n.m (22 lb ft) torque setting before going to the final step of rotating the bolts 50 degrees with the angle meter (J 45059). Reinstall the transaxle after taking out the Flywheel holder (J 44214) from the engine block.