How to replace the Windshield Washer Pump on 2007 Chevrolet Aveo?

Disable the battery by taking off the negative cable as the very first step. Subsequently, take off the left front wheel and remove all the screws that are holding the splash shield in place. Begin by disconnecting the electrical connector and the hose for the washer, and then take out the Washer Pump. Install the new Washer Pump at first, then connect the washer hose and the electrical connector. Make sure you install the front wheel well splash shield with the screws and tighten them to 1.5 n.m (13 lb in). At the end, secure the front left wheel and then reconnect the negative Battery Cable.

OEM 2007 Chevrolet Aveo Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Washer Pump found

View related parts
2007 Chevrolet Aveo Washer Pump
Part Number: 96397517
Product Specifications
- Other Name: Pump, Rear Window Wiper; Washer Pump Repair Kit; Windshield Washer Pump; Pump, Windshield Washer Pump
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.2 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96397517
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2007 Chevrolet Aveo Washer Pump

With a comprehensive array of OEM 2007 Chevrolet Aveo Washer Pump, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Aveo Washer Pump are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Aveo Washer Pump Parts Questions & Experts Answers

Q: How to replace the Windshield Washer Pump on 2007 Chevrolet Aveo?
A: Disable the battery by taking off the negative cable as the very first step. Subsequently, take off the left front wheel and remove all the screws that are holding the splash shield in place. Begin by disconnecting the electrical connector and the hose for the washer, and then take out the Washer Pump. Install the new Washer Pump at first, then connect the washer hose and the electrical connector. Make sure you install the front wheel well splash shield with the screws and tighten them to 1.5 n.m (13 lb in). At the end, secure the front left wheel and then reconnect the negative Battery Cable.

Related 2007 Chevrolet Aveo Parts

Alternate Year Models

2006 Chevrolet Aveo Washer Pump 2008 Chevrolet Aveo Washer Pump