How to replace the catalytic converter (RPO L61) on 2007 Chevrolet Cobalt?

Start the Catalytic Converter (RPO L61) replacement by disconnecting the heated Oxygen Sensor (HO2S) connector position assurance (CPA) retainer when regular production option (RPO) mn5 is present before removing the ho2s from its lead along the engine harness electrical connector. The ho2s cpa retainer should be removed when replacing ho2s lead from the engine harness electrical connector of vehicles equipped with rpo m86. First use a pair of pliers to slightly curve the wheel drive shaft heat shield trough then lead the ho2s away from its connector. Start by removing the ho2s then unfasten the Catalytic Converter to muffler pipe nuts before pulling the muffler pipe back until the studs free themselves from the Catalytic Converter. Pick off the Catalytic Converter pipe to Exhaust Manifold nuts followed by extracting the Catalytic Converter while discarding the exhaust gaskets. Work to remove all remaining gasket material from the Exhaust Manifold surface before installing new gaskets onto both the Exhaust Manifold studs as well as the Catalytic Converter. Screw the Catalytic Converter pipe to Exhaust Manifold nuts before tightening them to 50 n.m (37 lb ft). Position a new gasket onto the muffler pipe studs before pulling the pipe rearward and up for stud alignment to the Catalytic Converter. Subsequently install the Catalytic Converter to muffler pipe nuts torqued to 30 n.m (22 lb ft). Before installing the existing ho2s sensor, apply saturn pn 21485279 anti-seize compound or comparable thread lubricant on all threads and tighten the sensor to 42 n.m (31 lb ft). Run the ho2s lead through the heat shield trough before bending the trough to maintain the ho2s lead stability and reinstall the wheel drive shaft heat shield. Connect the ho2s lead to the engine harness electrical connector by installing the ho2s cpa retainer on vehicles with rpo m86. Connect the ho2s lead to the engine harness electrical connector then install the ho2s cpa retainer when using rpo mn5.

OEM 2007 Chevrolet Cobalt Catalytic Converter

Cat. Converter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Catalytic Converters found

View related parts
2007 Chevrolet Cobalt Catalytic Converter
Part Number: 22970504
$1486.68 MSRP: $2219.63
You Save: $732.95 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter, Catalytic Converter; Exhaust Pipe; Converter & Pipe; Converter, Exhaust Pipe
- Replaces: 15247469, 22703213, 15873731
- Item Weight: 11.30 Pounds
- Item Dimensions: 39.1 x 9.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22970504
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS
View related parts
2007 Chevrolet Cobalt Catalytic Converter
Part Number: 22970501
$1485.90 MSRP: $2218.47
You Save: $732.57 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter, Catalytic Converter; Exhaust Pipe; Converter & Pipe; Converter, Exhaust Pipe
- Replaces: 15247472
- Item Weight: 11.80 Pounds
- Item Dimensions: 39.5 x 9.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22970501
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Chevrolet Cobalt Catalytic Converter
Part Number: 22970503
$1212.65 MSRP: $1808.19
You Save: $595.54 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter, Catalytic Converter; Exhaust Pipe; Converter & Pipe; Converter, Exhaust Pipe
- Replaces: 15806266, 25832163
- Item Weight: 15.00 Pounds
- Item Dimensions: 39.5 x 9.6 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22970503
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- LS, LT, LTZ | 4 Cyl 2.2 L GAS
View related parts
2007 Chevrolet Cobalt Catalytic Converter
Part Number: 22970500
$1018.89 MSRP: $1517.25
You Save: $498.36 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter, Catalytic Converter; Exhaust Pipe; Converter & Pipe; Converter, Exhaust Pipe
- Replaces: 22695582, 15247471
- Item Weight: 10.90 Pounds
- Item Dimensions: 39.1 x 9.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22970500
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.4 L GAS
View related parts
2007 Chevrolet Cobalt Converter & Pipe
Part Number: 20889270
$990.46 MSRP: $1474.57
You Save: $484.11 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly-3Way Catalytic (W/Exhaust Manifold P; Catalytic Converter; Exhaust Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Replaces: 15873413
- Item Weight: 14.70 Pounds
- Item Dimensions: 35.9 x 16.0 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20889270
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.0 L GAS
View related parts
2007 Chevrolet Cobalt Catalytic Converter
Part Number: 22970502
$892.87 MSRP: $1328.03
You Save: $435.16 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter, Catalytic Converter; Exhaust Pipe; Converter & Pipe; Converter, Exhaust Pipe
- Replaces: 15806265, 25832162
- Item Weight: 14.80 Pounds
- Item Dimensions: 38.4 x 9.7 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22970502
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- LS, LT, LTZ | 4 Cyl 2.2 L GAS
View related parts
2007 Chevrolet Cobalt Catalytic Converter
Part Number: 22970505
$1517.68 MSRP: $2266.18
You Save: $748.50 (34%)
Product Specifications
- Other Name: Converter, Catalytic Converter; Exhaust Pipe; Converter & Pipe; Converter, Exhaust Pipe
- Replaces: 15247470, 15873732, 22703214
- Item Weight: 15.60 Pounds
- Item Dimensions: 41.2 x 16.3 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22970505
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS

2007 Chevrolet Cobalt Catalytic Converter

With a comprehensive array of OEM 2007 Chevrolet Cobalt Catalytic Converter, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Cobalt Catalytic Converter are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Cobalt Parts Questions & Experts Answers

Q: How to replace the catalytic converter (RPO L61) on 2007 Chevrolet Cobalt?
A: Start the Catalytic Converter (RPO L61) replacement by disconnecting the heated Oxygen Sensor (HO2S) connector position assurance (CPA) retainer when regular production option (RPO) mn5 is present before removing the ho2s from its lead along the engine harness electrical connector. The ho2s cpa retainer should be removed when replacing ho2s lead from the engine harness electrical connector of vehicles equipped with rpo m86. First use a pair of pliers to slightly curve the wheel drive shaft heat shield trough then lead the ho2s away from its connector. Start by removing the ho2s then unfasten the Catalytic Converter to muffler pipe nuts before pulling the muffler pipe back until the studs free themselves from the Catalytic Converter. Pick off the Catalytic Converter pipe to Exhaust Manifold nuts followed by extracting the Catalytic Converter while discarding the exhaust gaskets. Work to remove all remaining gasket material from the Exhaust Manifold surface before installing new gaskets onto both the Exhaust Manifold studs as well as the Catalytic Converter. Screw the Catalytic Converter pipe to Exhaust Manifold nuts before tightening them to 50 n.m (37 lb ft). Position a new gasket onto the muffler pipe studs before pulling the pipe rearward and up for stud alignment to the Catalytic Converter. Subsequently install the Catalytic Converter to muffler pipe nuts torqued to 30 n.m (22 lb ft). Before installing the existing ho2s sensor, apply saturn pn 21485279 anti-seize compound or comparable thread lubricant on all threads and tighten the sensor to 42 n.m (31 lb ft). Run the ho2s lead through the heat shield trough before bending the trough to maintain the ho2s lead stability and reinstall the wheel drive shaft heat shield. Connect the ho2s lead to the engine harness electrical connector by installing the ho2s cpa retainer on vehicles with rpo m86. Connect the ho2s lead to the engine harness electrical connector then install the ho2s cpa retainer when using rpo mn5.