How to replace the windshield washer reservoir on 2007 Chevrolet Cobalt?

Start by taking off the front fender liner and then pull the Washer Pump hose off the Washer Pump. Drain out the washer solvent into a clean container, and after that disconnect the electrical connectors from the Washer Pump and level sensor switch. Take out the washer solvent container from the right frame rail by removing the screws that hold it in place. When installing, put the new washer solvent container onto the right frame rail and fasten the screws until they reach 10 n.m (89 lb in) of torque. Connect both the electrical connectors for the Washer Pump and level sensor switch, and then join the Washer Pump hose to the spout on the Washer Pump. Fit the front fender liner back in, fill the washer solvent container with the correct liquid, and run the Washer Pump to see if it works and to find out if you have any leaks.

OEM 2007 Chevrolet Cobalt Washer Reservoir

Windshield Washer Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Washer Reservoirs found

View related parts
2007 Chevrolet Cobalt Washer Reservoir Part Number: 22695010
$46.74 MSRP: $83.46
You Save: $36.72 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Container, Windshield Washer; Container Kit, Windshield Washer
- Item Weight: 1.60 Pounds
- Item Dimensions: 4.9 x 21.1 x 11.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22695010
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2007 Chevrolet Cobalt Washer Reservoir Part Number: 22729469
Product Specifications
- Other Name: Container Kit-Windshield Washer Solvent; Container Kit, Windshield Washer
- Item Weight: 1.00 Pounds
- Item Dimensions: 23.2 x 13.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22729469
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.0 L GAS

2007 Chevrolet Cobalt Washer Reservoir

With a comprehensive array of OEM 2007 Chevrolet Cobalt Washer Reservoir, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Cobalt Washer Reservoir are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Cobalt Washer Reservoir Parts and Q&A

Q: How to replace the windshield washer reservoir on 2007 Chevrolet Cobalt?
A: Start by taking off the front fender liner and then pull the Washer Pump hose off the Washer Pump. Drain out the washer solvent into a clean container, and after that disconnect the electrical connectors from the Washer Pump and level sensor switch. Take out the washer solvent container from the right frame rail by removing the screws that hold it in place. When installing, put the new washer solvent container onto the right frame rail and fasten the screws until they reach 10 n.m (89 lb in) of torque. Connect both the electrical connectors for the Washer Pump and level sensor switch, and then join the Washer Pump hose to the spout on the Washer Pump. Fit the front fender liner back in, fill the washer solvent container with the correct liquid, and run the Washer Pump to see if it works and to find out if you have any leaks.