How to replace the rear Tail Light assembly or back up, sidemarker, stop, and turn signal bulbs on a sedan on 2007 Chevrolet Malibu?

To replace the tail lamp assembly or back up, side marker, stop and turn signal bulbs on sedan, first open the rear compartment and remove screws from the tail lamp. Draw the side trim panel out from the in back compartment and take the wing nut off of the tail lamp. Pull the tail lamp away from the quarter panel moving it rearward unlatch the electrical connector from the tail lamp wiring harness. Untwine the tail lamp, stop lamp, and back up lamp sockets by turning them by 360 degrees counterclockwise, and extract the bulbs from their sockets. For installation, simply insert on the new bulbs to the tail lamp, the stop lamp, or rear window lamp sockets, then turn the sockets clockwise until secure. Reconnect the electrical connector to the tail lamp wiring harness and locate the tail lamp first to the quarter panel with the 2 locking pins seated. Insert the tail lamp screws and tighten them to 2 N.m (18 lb in), insert the wing nut from inside the rear compartment and reinstall the trim panel and close the rear compartment lid.

OEM 2007 Chevrolet Malibu Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Tail Lights found

View related parts
2007 Chevrolet Malibu Tail Lamp Assembly, Passenger Side
Part Number: 15868493
$148.57 MSRP: $212.59
You Save: $64.02 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly-Tail (Right-Hand ); Tail Light Assembly; Back Up Light; Tail Lamps; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Replaces: 21997424, 22730512, 22626170
- Item Weight: 2.20 Pounds
- Item Dimensions: 15.0 x 11.5 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15868493
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, LS, LT, LTZ, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2007 Chevrolet Malibu Tail Lamp Assembly, Passenger Side
Part Number: 19259999
$186.73 MSRP: $279.17
You Save: $92.44 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly, Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Replaces: 15851071, 15868491, 25821797, 10381702, 21997390
- Item Weight: 2.50 Pounds
- Item Dimensions: 20.3 x 14.6 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19259999
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2007 Chevrolet Malibu Tail Lamp Assembly, Driver Side
Part Number: 15868494
Product Specifications
- Other Name: Lamp, Tail Lamp; Tail Light Assembly; Back Up Light; Tail Lamps; Tail Light
- Position: Driver Side
- Replaces: 21997425, 22626171, 22730513
- Item Weight: 2.10 Pounds
- Item Dimensions: 15.6 x 11.5 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15868494
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, LS, LT, LTZ, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2007 Chevrolet Malibu Tail Lamp Assembly, Driver Side
Part Number: 19260000
$55.91 MSRP: $83.22
You Save: $27.31 (33%)
Product Specifications
- Other Name: Lamp Assembly, Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Replaces: 10381703, 15851072, 21997391, 15868492, 25821798
- Item Weight: 2.40 Pounds
- Item Dimensions: 21.4 x 14.9 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19260000
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

2007 Chevrolet Malibu Tail Light

With a comprehensive array of OEM 2007 Chevrolet Malibu Tail Light, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Malibu Tail Light are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Malibu Parts Questions & Experts Answers

Q: How to replace the rear Tail Light assembly or back up, sidemarker, stop, and turn signal bulbs on a sedan on 2007 Chevrolet Malibu?
A: To replace the tail lamp assembly or back up, side marker, stop and turn signal bulbs on sedan, first open the rear compartment and remove screws from the tail lamp. Draw the side trim panel out from the in back compartment and take the wing nut off of the tail lamp. Pull the tail lamp away from the quarter panel moving it rearward unlatch the electrical connector from the tail lamp wiring harness. Untwine the tail lamp, stop lamp, and back up lamp sockets by turning them by 360 degrees counterclockwise, and extract the bulbs from their sockets. For installation, simply insert on the new bulbs to the tail lamp, the stop lamp, or rear window lamp sockets, then turn the sockets clockwise until secure. Reconnect the electrical connector to the tail lamp wiring harness and locate the tail lamp first to the quarter panel with the 2 locking pins seated. Insert the tail lamp screws and tighten them to 2 N.m (18 lb in), insert the wing nut from inside the rear compartment and reinstall the trim panel and close the rear compartment lid.