How to replace the knock sensor for Bank 2 on 2007 Chevrolet Monte Carlo?

Replace the knock sensor for Bank 2 by raising and supporting the vehicle. Remove the knock sensor after disconnecting its electrical connector from the right side. The new knock sensor requires no application of thread sealant on its threads due to factory coating which can reduce the sensor's detonation detection capability. The knock sensor installation requires 25 N.m of torque while the right knock sensor connector needs to be reintegrated before the vehicle's descent.

OEM 2007 Chevrolet Monte Carlo Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2007 Chevrolet Monte Carlo Knock Sensor
Part Number: 12623730
$13.47 MSRP: $25.30
You Save: $11.83 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Ignition Knock (Detonation) Sensor
- Replaces: 12570125
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.7 x 2.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12623730
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Monte Carlo Submodels:
- LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2007 Chevrolet Monte Carlo Knock Sensor

With a comprehensive array of OEM 2007 Chevrolet Monte Carlo Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Monte Carlo Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Monte Carlo Parts Questions & Experts Answers

Q: How to replace the knock sensor for Bank 2 on 2007 Chevrolet Monte Carlo?
A: Replace the knock sensor for Bank 2 by raising and supporting the vehicle. Remove the knock sensor after disconnecting its electrical connector from the right side. The new knock sensor requires no application of thread sealant on its threads due to factory coating which can reduce the sensor's detonation detection capability. The knock sensor installation requires 25 N.m of torque while the right knock sensor connector needs to be reintegrated before the vehicle's descent.

Related 2007 Chevrolet Monte Carlo Parts

Alternate Year Models

2006 Chevrolet Monte Carlo Knock Sensor