OEM 2008 Buick LaCrosse Shift Cable

2008 Buick LaCrosse Parts Questions & Experts Answers

• Q: How to replace the automatic transmission shift cable on 2008 Buick LaCrosse?

  A: The first step to replace the automatic transmission range selector cable involves removing the air cleaner intake duct which applies to the 3.8l or 3.6l engine. First unfasten the cable from its harness clip before you take off the cable retainer to disconnect the cable from range selector lever and bracket through tab compression. Start by taking out any floor console and moving the carpet to reveal the cable for access. The cable retainer needs to be detached from the console shift control after which the cable must be taken off the shift control along with its bracket. When the vehicle has a steering column shift control the technician should first remove the left knee bolster before disconnecting the cable from the shift control lever. The cable passes through the cowl hole with guidance from mechanics wire and then the wire receives removal. Reinstall the left knee bolster only when needed then guide the cable from the console shift control bracket to its control before securing them. Fasten the cable retainer and move the carpet before putting the floor console back. After proper installation of the cable into its bracket and lever connection point, secure the retainer correctly. First set transaxle and shift control to neutral before connecting the cable sections properly while verifying their secure lock. The adjustment of the adjuster housing becomes possible through depressaging the adjuster clip which permits easy alignment of fittings while ensuring the conduit engages completely before checking for complete horseshoe clip flushness. The final step requires you to join the cable to the wiring harness clip before adjusting it while reinstalling the air cleaner intake duct.