OEM 2008 Buick LaCrosse Washer Reservoir

2008 Buick LaCrosse Washer Reservoir Parts and Q&A

• Q: How to replace the windshield washer reservoir on 2008 Buick LaCrosse?

  A: Distill all washer fluid from the current reservoir before starting the windshield washer solvent replacement work. Open the hood and drain washer solvent from the bottle before unscrewing the detergent bottle's top washer and its right-side front fender panel. Take off the Washer Pump hose along with its power connector and remove the washer solvent level sensor wire connections. Unbolt the Washer Pump and level sensor then remove it from the first step. Take the lower washer solvent container screws loose before pulling the container from its right frame rail position. Place the washer solvent tank at the right frame rail and fasten its lower screws tightly to 10 n.m (89 lb in). Put back the Washer Pump unit and sensor before connecting their electric power cables and washer solvent level sensor cable. Position the right front fender liner plus the upper washer solvent container screw and tighten both to 10 n.m (89 lb in). Add washer solvent into the solvent container and seal the hood.