How to replace the MAP Sensor (LY7 - Gas, 6 Cylinder, 3.6L, SFI, V6) on 2008 Cadillac SRX?

Turn off the ignition and disconnect the sensor electrical connector to replace the Barometric Pressure Sensor (LY7 - Gas, 6 Cylinder, 3.6L, SFI, V6). Before continuing take out the bolt that holds the barometric pressure sensor and set it aside. Position the replacement barometric pressure sensor according to the recommended installation steps in the Fastener Notice. Appy 89 lbs inches of torque to the barometric pressure sensor bolt before connecting the sensor electrical unit.

OEM 2008 Cadillac SRX MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2008 Cadillac SRX M.A.P. Sensor
Part Number: 19418808
$73.36 MSRP: $143.62
You Save: $70.26 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; MAP Sensor; Valve Assembly
- Replaces: 16249939, 09359409, 12614973, 16187556, 9359409
- Condition: New
- SKU: 19418808
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2008 Cadillac SRX Submodels:
- Base | 8 Cyl 4.6 L GAS

2008 Cadillac SRX MAP Sensor

With a comprehensive array of OEM 2008 Cadillac SRX MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Cadillac SRX MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Cadillac SRX Parts Questions & Experts Answers

Q: How to replace the MAP Sensor (LY7 - Gas, 6 Cylinder, 3.6L, SFI, V6) on 2008 Cadillac SRX?
A: Turn off the ignition and disconnect the sensor electrical connector to replace the Barometric Pressure Sensor (LY7 - Gas, 6 Cylinder, 3.6L, SFI, V6). Before continuing take out the bolt that holds the barometric pressure sensor and set it aside. Position the replacement barometric pressure sensor according to the recommended installation steps in the Fastener Notice. Appy 89 lbs inches of torque to the barometric pressure sensor bolt before connecting the sensor electrical unit.