How to replace the control lever and Shift Linkage Boot on 2008 Chevrolet Colorado?

To replace the control lever and shift boot, remove the shift lever assembly and console if necessary. Detach the control lever boot, shift the transmission into neutral, and remove the control lever housing assembly. Mask the opening to prevent debris, then reassemble and install the control lever housing and boot. Reinstall the console and shift lever assembly.

OEM 2008 Chevrolet Colorado Shift Linkage Boot

Shift Linkage Dust Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Shift Linkage Boot found

View related parts
2008 Chevrolet Colorado Inner Boot Part Number: 15840127
Product Specifications
- Other Name: Boot, Manual Transmission Control Lever; Boot, Transmission Control Lever
- Replaces: 15120986
- Item Weight: 1.40 Pounds
- Item Dimensions: 8.5 x 7.6 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15840127
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2008 Chevrolet Colorado Shift Linkage Boot

With a comprehensive array of OEM 2008 Chevrolet Colorado Shift Linkage Boot, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Colorado Shift Linkage Boot are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Colorado Shift Linkage Boot Parts and Q&A

Q: How to replace the control lever and Shift Linkage Boot on 2008 Chevrolet Colorado?
A: To replace the control lever and shift boot, remove the shift lever assembly and console if necessary. Detach the control lever boot, shift the transmission into neutral, and remove the control lever housing assembly. Mask the opening to prevent debris, then reassemble and install the control lever housing and boot. Reinstall the console and shift lever assembly.