How to replace the Engine Mount Bracket on 2008 Chevrolet Malibu?

Begin by removing the Engine Mount and then eliminate the intermediate bracket to engine bolts for subsequent removal of the intermediate bracket from the engine. Installation of the intermediate bracket starts by precisely positioning it on the engine while pre-tightening the bolts that pass through forward and front lower holes of the long bolts and rear upper hole of the short bolt according to the given fastener notice. After tightening the intermediate bracket bolts to 100 n.m (74 lb ft) install the Engine Mount.

OEM 2008 Chevrolet Malibu Engine Mount Bracket

Engine Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Engine Mount Brackets found

View related parts
2008 Chevrolet Malibu Mount Bracket
Part Number: 15298012
Product Specifications
- Other Name: Bracket, Engine Mounting
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.6 x 7.3 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15298012
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Malibu Submodels:
- Classic LS, Classic LT, LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Malibu Absorber Bracket
Part Number: 15935732
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount
- Replaces: 15224955
- Item Weight: 1.10 Pounds
- Item Dimensions: 14.1 x 4.5 x 14.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15935732
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Malibu Submodels:
- LT, LTZ | 6 Cyl 3.6 L GAS
View related parts
2008 Chevrolet Malibu Mount Bracket
Part Number: 25846770
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Mount Bracket
- Replaces: 15919610
- Item Weight: 3.20 Pounds
- Item Dimensions: 4.8 x 2.8 x 11.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25846770
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Malibu Submodels:
- Hybrid, LS, LT, LTZ | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS
View related parts
2008 Chevrolet Malibu Mount Bracket
Part Number: 9156953
Product Specifications
- Other Name: Bracket, Engine Mount; Engine Mount Bracket; Motor Mount; Side Bracket; Side Mount Bracket; Bracket, Engine Mounting
- Item Weight: 1.80 Pounds
- Item Dimensions: 10.3 x 5.1 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9156953
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Malibu Submodels:
- Base, Classic LS, LS, LT | 4 Cyl 2.2 L GAS
View related parts
2008 Chevrolet Malibu Mount Bracket
Part Number: 15224956
$41.59 MSRP: $65.13
You Save: $23.54 (37%)
Product Specifications
- Other Name: Bracket, Engine Mounting
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.2 x 4.8 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15224956
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Malibu Submodels:
- LT, LTZ | 6 Cyl 3.6 L GAS

2008 Chevrolet Malibu Engine Mount Bracket

With a comprehensive array of OEM 2008 Chevrolet Malibu Engine Mount Bracket, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Malibu Engine Mount Bracket are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Malibu Engine Mount Bracket Parts Questions & Experts Answers

Q: How to replace the Engine Mount Bracket on 2008 Chevrolet Malibu?
A: Begin by removing the Engine Mount and then eliminate the intermediate bracket to engine bolts for subsequent removal of the intermediate bracket from the engine. Installation of the intermediate bracket starts by precisely positioning it on the engine while pre-tightening the bolts that pass through forward and front lower holes of the long bolts and rear upper hole of the short bolt according to the given fastener notice. After tightening the intermediate bracket bolts to 100 n.m (74 lb ft) install the Engine Mount.