Other Name: Sealing Strip Assembly-Rear Side Door Window Outer; Door Moldings; Weatherstrip; Sealing Strip, Rear Side Door Window Glass Running (Outer & Inner)
Position: Rear Outer Passenger Side
Replaces: 15263160, 15834968
Item Weight: 0.90 Pounds
Item Dimensions: 41.3 x 4.1 x 1.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 25809071
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2008 Chevrolet Malibu Submodels:
Base, Classic LS, Classic LT, LS, LT, LTZ, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
Other Name: Sealing Strip Assembly-Rear Side Door Window Outer; Door Moldings; Weatherstrip; Sealing Strip, Rear Side Door Window Glass Running (Outer & Inner)
Position: Rear Outer Driver Side
Replaces: 15263161, 15834967
Item Weight: 3.70 Pounds
Item Dimensions: 42.5 x 4.1 x 1.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 25809072
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2008 Chevrolet Malibu Submodels:
Base, Classic LS, Classic LT, LS, LT, LTZ, SS | 4 Cyl 2.2 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2008 Chevrolet Malibu Submodels:
Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
| Page 1 of 3 |Next >
1-20 of 43 Results
2008 Chevrolet Malibu Weather Strip
With a comprehensive array of OEM 2008 Chevrolet Malibu Weather Strip, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Malibu Weather Strip are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2008 Chevrolet Malibu Weather Strip Parts Questions & Experts Answers
Q: How to replace the sunroof window Weather Strip on 2008 Chevrolet Malibu?
A: When changing the sunroof window seal, you will need to remove the sunroof window panel. Then remove the seal from the window panel frame by jerking the end of it and going to the outer perimeter. Use a clean, dampened cloth to clean the perimeter of the frame area using window cleaner GM P/N 1050427 (Canadian P/N 992727) or its equivalent, and let the driver air dry. Wipe the new seal with a small amount of exactly the same window-cleaner to make it easier to install. For installation. Place the sunroof window panel seal onto the window frame by beginning in the relief notch on the center of the passenger side. Push the seal into its seating around all the edges of the window frame, pressing so far as to require the use of a small rubber hammer if available. Replace the panel of the sunroof window and adjust the height of the window panel. Finally, test the sunroof for its appropriate operation.