OEM 2008 Chevrolet Uplander Brake Caliper Bracket

2008 Chevrolet Uplander Brake Caliper Bracket Parts Questions & Experts Answers

• Q: How to replace the front brake caliper bracket on 2008 Chevrolet Uplander?

  A: One must ensure safety from brake dust beforehand when replacing the front Brake Caliper Bracket. Support the caliper through heavy mechanics wire functioning as a stand-in for the hydraulic brake flexible hose. You should first remove brake pads from Brake Caliper Bracket then remove Brake Pad retainers. First remove Brake Caliper Bracket bolts before cleaning debris and thread locker off the bolt threads with a wire brush. The installation starts with unscrewing the Brake Caliper Bracket alongside the brake caliper bolt boots from the bracket. Carefully check the Brake Caliper Bracket for deformation and crack damage then thoroughly remove rust and dust from the contact zones of Brake Pad retainers and brake pads. Reposition the Brake Caliper Bracket in its proper position with the caliper bracket bolt threads maintained in clean inspected condition of the mounting holes in the knuckle. Thread lubricant gm p/n 12345493 or its equivalent should be applied to the bolts before installation at 185 n.m (137 lb ft) torque setting. The Brake Pad retainers will be installed onto the Brake Caliper Bracket through the application of high-temperature silicone brake lubricant along their contact points with the brake pads. Use the same lubricant to treat brake caliper bolt boots before placing them on the Brake Caliper Bracket. Install brake pads onto the Brake Caliper Bracket before reinstalling the brake caliper.