How to replace the rack and pinion boot and breather tube on 2008 Chevrolet Uplander?

To have a replacement of the rack and pinion boot and breather tube, one should begin by taking off the outer tie rod and the hexagon jam nut. Check inner tie rod against corrosion. In case of clarity, repair it, but, otherwise, change the rack and pinion. Install a new boot clamp and make sure it is properly aligned and then secure it.

OEM 2008 Chevrolet Uplander Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack and Pinion Boot found

View related parts
2008 Chevrolet Uplander Tie Rod Boot Part Number: 21011025
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder; Rack and Pinion Bellows Kit; Rack & Pinion Boot.; Inner Tie Rod Boot; Boot Kit; Boot; Boot Kit, Tie Rod End Dust
- Item Weight: 0.80 Pounds
- Item Dimensions: 12.0 x 4.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 21011025
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2008 Chevrolet Uplander Rack and Pinion Boot

With a comprehensive array of OEM 2008 Chevrolet Uplander Rack and Pinion Boot, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Uplander Rack and Pinion Boot are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Uplander Rack and Pinion Boot Parts and Q&A

Q: How to replace the rack and pinion boot and breather tube on 2008 Chevrolet Uplander?
A: To have a replacement of the rack and pinion boot and breather tube, one should begin by taking off the outer tie rod and the hexagon jam nut. Check inner tie rod against corrosion. In case of clarity, repair it, but, otherwise, change the rack and pinion. Install a new boot clamp and make sure it is properly aligned and then secure it.