ChevyParts
My Garage
My Account
Cart
OEM 2008 Chevrolet Uplander Power Steering Hose
Power Steering Pressure Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Power Steering Hoses found
2008 Chevrolet Uplander Power Steering Cooler
Part Number: 15777213$95.03 MSRP: $156.53You Save: $61.50 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Hose Assembly-Power Steering Fluid Cooling; Power Steering Hose; Power Steering Return Hose; Cooling Pipe; Hose, Steering Fluid Cooler
- Replaced by: 19540437
- Item Weight: 1.70 Pounds
- Item Dimensions: 29.3 x 26.0 x 9.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15777213
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2008 Chevrolet Uplander Pipe Kit
Part Number: 88963470$11.19 MSRP: $30.53You Save: $19.34 (64%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Pipe Kit, Hydraulic Steering Gear Pressure; Power Steering Hose; Pipe Kit, Steering Gear Oil Pressure
- Position: Passenger Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 18.5 x 4.8 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88963470
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Hose, Steering Gear Oil Pressure; Power Steering Hose; Pressure Hose; Hose, Hydraulic Steering Gear Pressure
- Replaces: 15777210
- Item Weight: 2.00 Pounds
- Item Dimensions: 29.5 x 16.9 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19333426
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Pipe, Steering Gear Oil Return; Power Steering Hose; Inlet Pipe
- Item Weight: 2.00 Pounds
- Item Dimensions: 23.1 x 10.9 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15893685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Pipe Kit, Steering Gear Left; Power Steering Hose; Pipe Kit, Hydraulic Steering Gear Pressure; Pipe Kit, Steering Gear Oil Pressure
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.8 x 5.0 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88963469
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2008 Chevrolet Uplander Power Steering Hose
With a comprehensive array of OEM 2008 Chevrolet Uplander Power Steering Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Uplander Power Steering Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2008 Chevrolet Uplander Power Steering Hose Parts Questions & Experts Answers
- Q: How to replace the Power Steering Hose on 2008 Chevrolet Uplander?A: The process of changing the power steering cooler pipe/hose begins with steering wheel positioning straight forward while supporting it to stay still and removing the key from the ignition. Secure the vehicle using a lift before removing the right splash shield below the engine. A drain pan needs to be placed underneath the vehicle followed by removal of the 2 routing clip retainers from both the rh side along with the front segment of the front cradle. The clamp should be compressed to disconnect the power steering inlet pipe/hose from the cooler pipe. Cautions must be exercised when disconnecting the intermediate shaft from the Rack And Pinion stub shaft because this action threatens the steering gear or intermediate shaft. The intermediate shaft pinch bolt allows separation of the steering gear from the intermediate shaft. Structurally support the rear part of the cradle support with a jack stand. Dissolve the 2 rear bolts securing the cradle support and lower the support to achieve adequate clearance. To start replace the power steering heat shield by removing its bolts and the shield before disconnecting the steering gear cooler pipe using a new o-ring seal and abandoning the old one. Eject the cooler pipe/hose from its installation position on the vehicle. Install the cooler pipe/hose by placing it on the vehicle then attach the steering gear fitting while using a new o-ring seal and applying 27 n.m of torque (20 lb ft). Secure the steering gear heat shield by installing its 2 bolts while tightening them to 14 n.m (124 lb in). Insert the compressed clamp onto the power steering pump inlet pipe/hose as it joins the power steering cooler pipe/hose. Lower the cradle support with the jack stand raised in the back position while you install the 2 rear cradle support bolts before tightening them to 165 n.m (122 lb ft). Proceed to install the pinch bolt onto the steering gear where you should tighten it to 48 n.m (35 lb ft). Position each routing clip retainer on the right hand side and front part of the cradle support before putting on the right side splash shield for the engine. Lower the vehicle then complete and perform a power steering system bleed procedure.
Related 2008 Chevrolet Uplander Parts
2008 Chevrolet Uplander Power Steering Pump
2008 Chevrolet Uplander Ignition Lock Assembly
2008 Chevrolet Uplander Power Steering Reservoir
2008 Chevrolet Uplander Rack And Pinion
2008 Chevrolet Uplander Rack and Pinion Boot
2008 Chevrolet Uplander Radius Heat Shield
2008 Chevrolet Uplander Shift Interlock Solenoid
2008 Chevrolet Uplander Steering Column
2008 Chevrolet Uplander Steering Column Cover
2008 Chevrolet Uplander Steering Wheel
2008 Chevrolet Uplander Tie Rod
2008 Chevrolet Uplander Tie Rod End