Make sure this part fits

GM 88963470
Pipe Kit

2005-2008 GM

Customer Questions & Expert Answers (9)
GM 88963470 Pipe Kit
  • Part Description
    Pipe Kit, Hydraulic Steering Gear Pressure; Power Steering Hose
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2006 Pontiac MontanaSV66 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88963470 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88963470 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done to catch any draining power steering fluid for the 2007 Buick Terraza? Posted by Customer
    A:
    Position a drain pan under the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the torque specification for the rear frame bolts for the 2005 Buick Terraza? Posted by Customer
    A:
    165 Nm (122 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step in the installation process for the 2006 Buick Terraza? Posted by Customer
    A:
    Install the new power steering pressure hose, followed by securing it to the hose retainer and connecting it to the steering gear, tightening the fitting to 27 Nm (20 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the Power Steering Pressure Pipe/Hose for the 2005 Buick Terraza? Posted by Customer
    A:
    Raise and support the vehicle, ensuring to disconnect the intermediate shaft from the steering gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after detaching the return hose for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be reinstalled after lowering for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Reinstall the right side engine splash shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done to gain clearance for the removal of the cooler pipe/hose for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Place a jack stand at the rear of the cradle support, remove the 2 rear cradle support bolts, and lower the rear of the cradle support.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be placed underneath to catch draining fluid for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    A drain pan.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pipe Kit 88963470 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88963470 Pipe Kit is available in the market under the name GM Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88963470 Pipe Kit fits certain Chevrolet Uplander models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana and Saturn Relay models.
The original GM component designated by manufacturer part number 88963470 maintains top performance when functioning as the Pipe Kit, Hydraulic Steering Gear Pressure; Power Steering Hose unit at its Passenger Side. The component 88963470 is constructed from durable material and its dimensions span 18.5 x 4.8 x 2.4 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pipe Kit, Steering Gear Oil Pressure. The part 88963470 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.