Make sure this part fits

GM 10413307
Heat Shield

2001-2006 GM

Customer Questions & Expert Answers (6)
GM 10413307 Heat Shield
  • Part Description
    Shield, Steering Gear Mounting; Radius Heat Shield
  • Manufacturer
    General Motors
Make sure this part fits
$5.75 MSRP: $9.77
You Save: $4.02 (42%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number10413307
    Part DescriptionShield, Steering Gear Mounting; Radius Heat Shield
    Other NamesShield, Steering Gear
    Item Dimensions10.3 x 5.3 x 5.3 inches
    Item Weight0.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU10413307
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2005-2006 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2006 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2002-2003 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    2002-2004 Oldsmobile SilhouetteGL, GLS, Premiere6 Cyl 3.4 L GAS
    2001-2005 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    2002-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2006 Saturn Relay2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 10413307 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 10413307 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Radius Heat Shield on Buick Terraza? Posted by Customer
    A:
    One must elevate and stabilize the vehicle as a starting point to replace the power steering gear heat shield. All-wheel drive vehicles require removal of the right side engine splash shield to reach the heat shield. Begin by removing the steering gear heat shield bolts and continuing to the heat shield detachment after these bolts are gone. Start with heat shield placement using the fastener notice in service precautions as a guide before steering gear heat shield installation. Fasten the steering gear heat shield bolts with torque at 14 nm (124 inch lbs.). Vehicle owners with all-wheel drive should place the right side engine splash shield back before lowering their vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Radius Heat Shield on Buick Rendezvous? Posted by Customer
    A:
    The replacement process of the power steering gear heat shield starts with proper vehicle elevation and support. The right side engine splash shield needs removal when using all-wheel drive to reach the heat shield. Initially you must remove all bolts from the steering gear heat shield before removing the shield itself. Begin heat shield installation by placing the steering gear heat shield properly in position according to fastener notice in service precautions. Secure the steering gear heat shield bolts at 14 nm (10 ft. Lbs.) torque. Before putting the vehicle down, any owner with all-wheel drive vehicles should reattach the right side engine splash shield.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Radius Heat Shield on Chevrolet Uplander? Posted by Customer
    A:
    First, raise and support the vehicle to replace power steering gear heat shield. In case it was installed with all-wheel drive or not, remove the right side engine splash shield, if access is needed to the heat-shield. Then, there are the steering gear heat shield bolts and heat shield as well, which have to be removed next. In installing, put the steering gear heat shield back in place and fasten the steering gear heat shield bolts to 14 nm (124 inch lbs.). If the vehicle has an all-wheel drive, replace the right side engine splash shield before you lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for the steering gear heat shield bolts for the 2004 Buick Rendezvous? Posted by Customer
    A:
    Tighten the steering gear heat shield bolts to 14 Nm (124 inch lbs.) before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radius Heat Shield
    Q:
    What is the final step if it has all wheel drive for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Reinstall the right side engine splash shield before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Radius Heat Shield
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 10413307, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 10413307 Heat Shield. It is sometimes referred to as GM Radius Heat Shield. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 10413307 Heat Shield. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery