Make sure this part fits

GM 88963469
Pipe Kit

2005-2008 GM

Customer Questions & Expert Answers (9)
GM 88963469 Pipe Kit
  • Part Description
    Pipe Kit, Steering Gear Left; Power Steering Hose
  • Manufacturer
    General Motors
Make sure this part fits
$15.20 MSRP: $30.53
You Save: $15.33 (51%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2007 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2008 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    2005-2006 Pontiac MontanaSV66 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2005-2007 Saturn Relay1, 2, 36 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88963469 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88963469 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What needs to be disconnected from the cooler pipe for the 2005 Buick Terraza? Posted by Customer
    A:
    The return hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the final step after reinstalling the frame rear bolts for the 2005 Buick Terraza? Posted by Customer
    A:
    Tighten them to 165 Nm (122 ft. lbs.), remove the utility stand, install the intermediate shaft to the steering gear, lower the vehicle, and bleed the power steering system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you disconnect the power steering pump inlet pipe/hose for the 2007 Buick Terraza? Posted by Customer
    A:
    Compress the clamp and disconnect it from the power steering reservoir.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after removing the drive belt for the 2006 Buick Terraza? Posted by Customer
    A:
    Disconnect the power steering pressure hose from the pump and raise the vehicle, ensuring to disconnect the intermediate shaft from the steering gear to prevent damage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after removing the routing clip nut for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Separate the power steering pump inlet pipe/hose from the routing clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after connecting the power steering pump inlet pipe/hose for the 2008 Chevrolet Uplander? Posted by Customer
    A:
    Remove the drain pan, raise the rear of the cradle support, and install the 2 rear cradle support bolts, tightening them to 165 N.m (122 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after lowering and reattaching the splash shield for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Reinstall the drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the Power Steering Return Hose for the 2005 Chevrolet Uplander? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pipe Kit 88963469 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88963469 Pipe Kit is available in the market under the name GM Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88963469 Pipe Kit fits certain Chevrolet Uplander models, as well as Buick Terraza. Additionally, it is compatible with Pontiac Montana and Saturn Relay models.
The original GM component designated by manufacturer part number 88963469 maintains top performance when functioning as the Pipe Kit, Steering Gear Left; Power Steering Hose unit. The component 88963469 is constructed from durable material and its dimensions span 10.8 x 5.0 x 2.2 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pipe Kit, Hydraulic Steering Gear Pressure; Pipe Kit, Steering Gear Oil Pressure. The part 88963469 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.