How to replace the shock absorber on 2008 Chevrolet Uplander?

Start by lifting the vehicle with a frame-contact vehicle lift so you can safely replace the strut assembly. Strut replacement must be done without using a suspension-contact lift. Start by removing the tire and wheel and then remove the wiper module. Start by taking out the upper strut nuts followed by marking the strut to the knuckle and then disassembling the lower strut bolts and nuts to remove the entire strut. The installation process starts with the strut placement before torqueing the upper strut nuts to 30 N.m (22 lb ft). For both strut lower bolts and nuts tighten while both components should remain clean of rust and develop 3 N.m (27 lb in) torque against each other until proper seating happens. if not, replace the fastener. Align the strut to the knuckle mark before tightening the lower strut nuts with 112 N.m (83 lb ft) of torque. Put the wiper module back in place before reinstalling the tire and wheel and check the vehicle alignment afterward.

OEM 2008 Chevrolet Uplander Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Shock Absorbers found

View related parts
2008 Chevrolet Uplander Shock Absorber, Rear
Part Number: 15926213
$180.75 MSRP: $181.36
You Save: $0.61 (1%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly-Rear Leveling Shock; Shock; Absorber, Shock Absorber Air Lift
- Position: Rear
- Replaces: 15216493, 15829670
- Item Weight: 5.90 Pounds
- Item Dimensions: 21.3 x 3.7 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15926213
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Uplander Strut
Part Number: 88965456
$106.59 MSRP: $200.15
You Save: $93.56 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Assembly, Front Suspension; Complete Suspension Strut and Shock Absorber Kit.; Strut, Front And Rear Suspension
- Position: Front
- Replaces: 88965457
- Item Weight: 7.10 Pounds
- Item Dimensions: 7.2 x 24.2 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88965456
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Uplander Shock Absorber
Part Number: 15943270
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Complete Strut and Shock Absorber Set.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Replaces: 10413405, 10311197, 10288272, 10406050, 10310676, 10318617, 88963482, 10331459, 10401283, 10331458, 10406052, 10401282
- Item Weight: 4.10 Pounds
- Item Dimensions: 26.5 x 4.7 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15943270
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2008 Chevrolet Uplander Shock Absorber

With a comprehensive array of OEM 2008 Chevrolet Uplander Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Uplander Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Uplander Shock Absorber Parts Questions & Experts Answers

Q: How to replace the shock absorber on 2008 Chevrolet Uplander?
A: Start by lifting the vehicle with a frame-contact vehicle lift so you can safely replace the strut assembly. Strut replacement must be done without using a suspension-contact lift. Start by removing the tire and wheel and then remove the wiper module. Start by taking out the upper strut nuts followed by marking the strut to the knuckle and then disassembling the lower strut bolts and nuts to remove the entire strut. The installation process starts with the strut placement before torqueing the upper strut nuts to 30 N.m (22 lb ft). For both strut lower bolts and nuts tighten while both components should remain clean of rust and develop 3 N.m (27 lb in) torque against each other until proper seating happens. if not, replace the fastener. Align the strut to the knuckle mark before tightening the lower strut nuts with 112 N.m (83 lb ft) of torque. Put the wiper module back in place before reinstalling the tire and wheel and check the vehicle alignment afterward.