OEM 2008 GMC Canyon Coolant Reservoir

2008 GMC Canyon Coolant Reservoir Parts and Q&A

• Q: How to replace the coolant reservoir on 2008 GMC Canyon?

  A: To replace the Coolant Reservoir, one should first partially drain out the coolant using the appropriate method. Thereafter, take out the air cleaner assembly. Unclasp the coolant overflow hose from the Coolant Reservoir and unfasten the bolt that attaches the reservoir to the Coolant Reservoir bracket. Disconnect the radiator vent hose from the reservoir and unbolt the reservoir to the front wheel house panel before removing the Coolant Reservoir. For installation, locate the Coolant Reservoir, and also install the retaining bolt to the front wheelhouse panel and tighten it to 12 n.m (106 lb in). Install the radiator vent hose to the Coolant Reservoir, then bolt the reservoir to the Coolant Reservoir bracket with bolt, nut is tightened with 10 n.m (88 lb in). Put the overflow hose onto the Coolant Reservoir and replace the air cleaner assembly. Finally, fill the cooling system using the suitable technique.