How to Replace the Headlight Bulb on 2008 GMC Envoy?

Question

Accepted Answer

Before replacing the headlamp bulb of a rainier or envoy you need to turn off the lamp switch while the bulb becomes cool. Eye protection should always be worn and you must touch the bulb through its base because contact with glass should be avoided. Frequent exposure to dust and water should be avoided from the bulb area while proper disposal practices must be followed for used bulbs. For safety purposes regard all touching of the bulb or exposure to water sources. Cleaning the bulb should begin with alcohol usage or degreasing solutions followed by complete drying after application. Join the procedure by unlatching the hood before removing both the headlamp and its access cover at the back. Turn the electrical connector off from the socket and spin the bulb and socket left while they detach from the housing. During installation attach the electrical connector to the socket while using a high beam bulb and black socket or a low beam bulb and gray tip and gray socket combination respectively. First install the bulb and socket clockwise until they secure into their housing position followed by reinstallation of the cover before installing the headlamp.

OEM 2008 GMC Envoy Headlight Bulb

2 Headlight Bulbs found

2008 GMC Envoy Bulb & Socket Part Number: 19257054

2008 GMC Envoy Bulb & Socket, Green Line Part Number: 9441732

2008 GMC Envoy Headlight Bulb

2008 GMC Envoy Headlight Bulb Parts and Q&A

Related 2008 GMC Envoy Parts

Alternate Year Models