How to replace the input shaft transfer case seal on 2008 GMC Envoy?

The first step in replacing the input shaft seal requires vehicle elevation. The next step requires you to take out the Transfer Case assembly. Perator carefully when using a pry tool to remove seals since improper force can harm both Transfer Case sealing surfaces and shafts leading to leakage or future requirement for new parts. Use a flat-bladed screwdriver to separate the input shaft seal from its position on the Transfer Case before extracting it together with the front input shaft seal. Users should line up the new input shaft seal onto the input shaft before using the j 42738 seal installer (J 42738) tool to install the input shaft seal. Check the Transfer Case fluid level then restore the Transfer Case assembly while performing an inspection of the Transfer Case fluid level before bringing the vehicle to the ground.

OEM 2008 GMC Envoy Transfer Case Seal

Transfer Case Output Shaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Transfer Case Seals found

View related parts
2008 GMC Envoy Extension Seal, Rear
Part Number: 88935685
$75.70 MSRP: $118.56
You Save: $42.86 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Transfer Case Rear Output Shaft; Transfer Case Gasket; Seal, Transfer Case
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.8 x 3.9 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88935685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 GMC Envoy Extension Housing Seal, Rear
Part Number: 24232325
$14.36 MSRP: $23.64
You Save: $9.28 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Rear Bearing Retaining; Automatic Transmission Extension Housing Seal; Transmission Seal; Seal, Transmission Rear Main Bearing; Seal, Transmission Extension
- Position: Rear
- Replaces: 24201470
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.7 x 3.8 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24232325
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2008 GMC Envoy Transfer Case Seal

With a comprehensive array of OEM 2008 GMC Envoy Transfer Case Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 GMC Envoy Transfer Case Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 GMC Envoy Parts Questions & Experts Answers

Q: How to replace the input shaft transfer case seal on 2008 GMC Envoy?
A: The first step in replacing the input shaft seal requires vehicle elevation. The next step requires you to take out the Transfer Case assembly. Perator carefully when using a pry tool to remove seals since improper force can harm both Transfer Case sealing surfaces and shafts leading to leakage or future requirement for new parts. Use a flat-bladed screwdriver to separate the input shaft seal from its position on the Transfer Case before extracting it together with the front input shaft seal. Users should line up the new input shaft seal onto the input shaft before using the j 42738 seal installer (J 42738) tool to install the input shaft seal. Check the Transfer Case fluid level then restore the Transfer Case assembly while performing an inspection of the Transfer Case fluid level before bringing the vehicle to the ground.