ChevyParts
My Garage
My Account
Cart
OEM 2008 GMC Yukon Evaporator
A/C Evaporator Core- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Evaporators found
2008 GMC Yukon Evaporator Core Part Number: 89019027
$213.23 MSRP: $438.18You Save: $224.95 (52%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Evaporator Assembly, A/C; A/C Evaporator Core Repair Kit; A/C Evaporator Core; A/C Evaporator; Evaporator, A/C Evaporator; Evaporator
- Replaces: 89018296
- Item Weight: 7.90 Pounds
- Item Dimensions: 21.2 x 18.4 x 10.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89019027
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2008 GMC Yukon Evaporator Core Part Number: 84802280
$221.98 MSRP: $456.16You Save: $234.18 (52%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Evaporator, Air Conditioner Evaporator; Evaporator; Evaporator, A/C Evaporator
- Replaces: 20827668, 20859526, 84407041, 84128072, 84358044, 15232208, 15920870
- Item Weight: 2.30 Pounds
- Item Dimensions: 18.7 x 12.5 x 6.2 inches
- Condition: New
- SKU: 84802280
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2008 GMC Yukon Evaporator
With a comprehensive array of OEM 2008 GMC Yukon Evaporator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 GMC Yukon Evaporator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2008 GMC Yukon Evaporator Parts and Q&A
- Q: How to replace the air conditioning evaporator core on 2008 GMC Yukon?A: The air conditioning Evaporator core replacement starts with unmounting the hvac module. The hvac module requires heat stakes removal using a screwdriver combination with hammer. Use a screwdriver to disconnect all wiring from the Blower Motor together with the Blower Motor control module and sensors while removing all wiring from retainers ahead of moving forward. Remove the screws from the hvac module assembly when equipped. The Evaporator cowl gasket should be detached from the Evaporator before the upper hvac module assembly is split from the lower hvac module assembly. Take out the Evaporator core which belongs to the upper hvac module assembly . Although the replacement requires a new core for the Evaporator do not forget to lubricate it with refrigerant oil. Install the Evaporator core within the hvac module assembly before rejoining the upper section of the hvac module assembly to the lower section. The new Evaporator cowl gasket should be installed on the Evaporator first while the hvac module assembly receives its screws until they achieve a torque of 2 n.m (18 lb in). The hvac module assembly needs to be installed at the completion of the procedure.
Related 2008 GMC Yukon Parts
2008 GMC Yukon Blend Door Actuator
2008 GMC Yukon Blower Motor
2008 GMC Yukon A/C Clutch
2008 GMC Yukon A/C Compressor
2008 GMC Yukon A/C Condenser
2008 GMC Yukon A/C Expansion Valve
2008 GMC Yukon A/C Hose
2008 GMC Yukon A/C Orifice Tube
2008 GMC Yukon A/C Service Cap
2008 GMC Yukon A/C Switch
2008 GMC Yukon Blower Control Switches
2008 GMC Yukon Heater Core