How to replace the rear brake line on 2009 Buick Enclave?

First support and elevate the vehicle to work on the brake system. Take out both tire and wheel unit. Remove all dirt particles from the brake pipe fitting location. Secure one end of the brake hose while using a back up wrench to detach the brake pipe fitting and place the cap over it to contain the brake fluid. Remove the 2 brake hose fitting gaskets and brake hose fitting bolt until you can pull out the brake hose from its location. Attaching the brake hose fitting bolt and 2 new gaskets for the brake hose begins the installation. Install the brake hose parts to the caliper before tightening the bolt to 50 Nm (37 lb ft). Secure the brake hose bracket bolt by turning it clockwise to 12 Nm (106 lb in). Twist the brake pipe fitting against the back up wrench until the fitting passes the specifications of 17 Nm (13 lb ft). Drain your hydraulic brake system fluid before attaching the tire and wheel unit and bringing down the vehicle.

OEM 2009 Buick Enclave Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Lines found

View related parts
2009 Buick Enclave Flex Hose, Front Driver Side
Part Number: 19366774
$32.83 MSRP: $61.64
You Save: $28.81 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 15115039
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.1 x 3.1 x 19.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366774
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Buick Enclave Submodels:
- Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
View related parts
2009 Buick Enclave Flex Hose, Front Passenger Side
Part Number: 19366775
$35.37 MSRP: $66.42
You Save: $31.05 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15115040
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.0 x 3.1 x 20.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366775
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Buick Enclave Submodels:
- Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
View related parts
2009 Buick Enclave Flex Hose, Rear
Part Number: 19368466
$28.67 MSRP: $53.85
You Save: $25.18 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 15921564, 23494652, 25800749
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.4 x 12.8 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19368466
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Buick Enclave Submodels:
- Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
View related parts
2009 Buick Enclave Flex Hose, Rear
Part Number: 19368465
$29.75 MSRP: $53.85
You Save: $24.10 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaced by: 19540594
- Replaces: 15921567, 25800751, 23494651
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.1 x 3.1 x 16.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19368465
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Buick Enclave Submodels:
- Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS

2009 Buick Enclave Brake Line

With a comprehensive array of OEM 2009 Buick Enclave Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Buick Enclave Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Buick Enclave Parts Questions & Experts Answers

Q: How to replace the rear brake line on 2009 Buick Enclave?
A: First support and elevate the vehicle to work on the brake system. Take out both tire and wheel unit. Remove all dirt particles from the brake pipe fitting location. Secure one end of the brake hose while using a back up wrench to detach the brake pipe fitting and place the cap over it to contain the brake fluid. Remove the 2 brake hose fitting gaskets and brake hose fitting bolt until you can pull out the brake hose from its location. Attaching the brake hose fitting bolt and 2 new gaskets for the brake hose begins the installation. Install the brake hose parts to the caliper before tightening the bolt to 50 Nm (37 lb ft). Secure the brake hose bracket bolt by turning it clockwise to 12 Nm (106 lb in). Twist the brake pipe fitting against the back up wrench until the fitting passes the specifications of 17 Nm (13 lb ft). Drain your hydraulic brake system fluid before attaching the tire and wheel unit and bringing down the vehicle.