How to Service and Repair Brake Lines Using the J 45405 Pipe Flaring Tool Kit on Buick Enclave?

Use a J 45405 Tool Kit (J 45405) to repair brake pipes by ensuring you use double-walled steel brake line so the system does not fail. Before starting you need to examine the damaged brake pipe section and free it from retaining hardware when needed. Pick a recommended spot to cut the brake pipe and stay clear of bends or mounting points. Then measure the broken pipe span including the added flare dimension of 6.35 mm for 4.76 mm pipes and 9.50 mm for 6.35 mm pipes. You should use the J 45405 pipe cutter to make square cuts across the brake pipe then take away the divided piece. Choose the suitable brake pipe sizes and tube nuts before using the coating stripping tool and de-burring tool from J 45405 (J 45405) set to prepare the flaring end. Place tube nuts on both ends while clearing dirt from the brake pipe and J 45405 tool before unlatching the die clamping screw. Place the correct die set into the die cage before inserting the prepared pipe and operating the lever of J 45405 to create the flare. Ensure the flare matches 0.265-0.279 inch for a 3/16 inch pipe and 0.344-0.358 inch for a 1/4 inch pipe. Then adjust the new pipe with a bending tool when required and attach it correctly with unions and retainers followed by hydraulic brake system bleeding. Use a leak test to find any problems with brake pipe flares when the engine runs and brakes engage.

OEM Buick Enclave Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Brake Lines found

View related parts
Buick Enclave Flex Hose, Front Driver Side Part Number: 19366774
$32.83 MSRP: $61.64
You Save: $28.81 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 15115039
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2017 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Flex Hose, Front Passenger Side Part Number: 84940736
$23.50 MSRP: $41.96
You Save: $18.46 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Buick Enclave | Avenir, Essence, Preferred, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Flex Hose, Front Driver Side Part Number: 84940737
$23.50 MSRP: $41.96
You Save: $18.46 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Buick Enclave | Avenir, Essence, Preferred, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Flex Hose, Front Driver Side Part Number: 84412467
$12.77 MSRP: $23.10
You Save: $10.33 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 84414508, 84292717, 84006977
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Buick Enclave | Avenir, Base, Essence, Preferred, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Flex Hose, Front Passenger Side Part Number: 84412466
$12.77 MSRP: $23.10
You Save: $10.33 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 84414507, 84292716, 84006976
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Buick Enclave | Avenir, Base, Essence, Preferred, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Flex Hose, Front Passenger Side Part Number: 19366775
$35.37 MSRP: $66.42
You Save: $31.05 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15115040
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2017 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Flex Hose, Passenger Side Part Number: 84466932
$13.19 MSRP: $23.90
You Save: $10.71 (45%)
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaced by: 86529259
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Buick Enclave | Avenir, Base, Essence, Preferred, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Flex Hose, Rear Part Number: 19368466
$28.67 MSRP: $53.85
You Save: $25.18 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 15921564, 23494652, 25800749
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2017 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Flex Hose, Rear Part Number: 19368465
$29.24 MSRP: $54.93
You Save: $25.69 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaced by: 19540594
- Replaces: 15921567, 25800751, 23494651
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2017 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS

Buick Enclave Brake Line

Want to cut long-term maintenance and repair costs? Choose OEM Brake Line. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Enclave parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Enclave Brake Line includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Brake Line in Buick Enclave vehicles used in the transporting of the brake fluid through the master cylinder to the brake caliper pistons for the hydraulic braking system to perform its function properly. Rust and shock impacts may cause damages to metal brake lines that may result to the leakage of the brake fluid and consequently a loss of hydraulic pressure. Like any rubber component, brake hoses are also subjected to both outer and inner wear which compromises with the brake system. When replacement is required, there are pre-bent brake line kit and corrosion protected stainless steel brake hoses for fitting. The use of the commercial quality metal braid from going back to standard rubber hoses could dramatically enhance the tactile feedback that is felt on the pedals, mainly in performance driving conditions.

Buick Enclave Brake Line Parts Questions & Experts Answers

Flex Hose, Front Driver Side
19366774
Q: How to Service and Repair Brake Lines Using the J 45405 Pipe Flaring Tool Kit on Buick Enclave?
A:
Use a J 45405 Tool Kit (J 45405) to repair brake pipes by ensuring you use double-walled steel brake line so the system does not fail. Before starting you need to examine the damaged brake pipe section and free it from retaining hardware when needed. Pick a recommended spot to cut the brake pipe and stay clear of bends or mounting points. Then measure the broken pipe span including the added flare dimension of 6.35 mm for 4.76 mm pipes and 9.50 mm for 6.35 mm pipes. You should use the J 45405 pipe cutter to make square cuts across the brake pipe then take away the divided piece. Choose the suitable brake pipe sizes and tube nuts before using the coating stripping tool and de-burring tool from J 45405 (J 45405) set to prepare the flaring end. Place tube nuts on both ends while clearing dirt from the brake pipe and J 45405 tool before unlatching the die clamping screw. Place the correct die set into the die cage before inserting the prepared pipe and operating the lever of J 45405 to create the flare. Ensure the flare matches 0.265-0.279 inch for a 3/16 inch pipe and 0.344-0.358 inch for a 1/4 inch pipe. Then adjust the new pipe with a bending tool when required and attach it correctly with unions and retainers followed by hydraulic brake system bleeding. Use a leak test to find any problems with brake pipe flares when the engine runs and brakes engage.