OEM 2009 Cadillac CTS Fuel Level Sensor

2009 Cadillac CTS Parts Questions & Experts Answers

• Q: How to replace the Fuel Level Sensor on the left side on 2009 Cadillac CTS?

  A: You must first detach the Fuel Tank because it enables direct access to the secondary Fuel Tank module to perform this replacement task. The electric connector should detach from the module before placing it in position. Only use the j 45722 to free the Fuel Tank module lock ring for counterclockwise turning with a long breaker-bar while protecting the lock ring from damage. Extract the secondary Fuel Tank module partially while removing the cam lock ring through a counterclockwise turn with a long breaker-bar to reach the fuel transfer hose quick connect fitting without harming the float arm. Detach the quick connect fitting and take the secondary Fuel Tank module out of the Fuel Tank while disposing the old Fuel Tank module seal. Check the lock ring for damage because replacement is necessary if it exceeds 0.41 mm (0.016 in) of warping. The installation process requires a brand-new Fuel Tank module seal for use while connecting the fuel transfer hose quick connect fitting to the Fuel Tank module. First place the secondary Fuel Tank module onto the encapsulated ring before rotating the lock ring in a clockwise direction until it completes its proper position. Students should employ j 45722 with a long breaker-bar to install the lock ring until it is fully seated before reconnecting the electrical connector to the secondary Fuel Tank module and then reinstalling the Fuel Tank.