How to replace the Primary Fuel Level Sensor on 2008 Cadillac CTS?

You must remove the primary fuel tank module before you start the replacement process of the primary fuel level sensor. Macro-connect the fuel level sensor electrical connector to disengage it from the module. The removal of the fuel level sensor from the module requires users to pull the locking tab in an opposite direction from the sensor then slide the sensor out of the module. To install the sensor position its tabs exactly on the module assembly slots before fully inserting it into place with the tabs secured and then attach the fuel level sensor electrical connector to the module. You must install the primary fuel tank module at the end of your work.

OEM 2008 Cadillac CTS Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Level Sensor found

View related parts
2008 Cadillac CTS Fuel Gauge Sending Unit, Passenger Side Part Number: 19180436
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit; Level Sensor
- Position: Passenger Side
- Replaces: 19168843
- Item Weight: 2.30 Pounds
- Item Dimensions: 10.4 x 4.6 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19180436
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac CTS Submodels:
- Base, V | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS

2008 Cadillac CTS Fuel Level Sensor

With a comprehensive array of OEM 2008 Cadillac CTS Fuel Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Cadillac CTS Fuel Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Cadillac CTS Fuel Level Sensor Parts and Q&A

Q: How to replace the Primary Fuel Level Sensor on 2008 Cadillac CTS?
A: You must remove the primary fuel tank module before you start the replacement process of the primary fuel level sensor. Macro-connect the fuel level sensor electrical connector to disengage it from the module. The removal of the fuel level sensor from the module requires users to pull the locking tab in an opposite direction from the sensor then slide the sensor out of the module. To install the sensor position its tabs exactly on the module assembly slots before fully inserting it into place with the tabs secured and then attach the fuel level sensor electrical connector to the module. You must install the primary fuel tank module at the end of your work.