How to replace the rack and pinion boot and breather tube on 2009 Cadillac DTS?

To change the rack and pinion boot and breather tube, remove the outer tie rod and the hexagon jam nut from the inner tie rod assembly. Inspect the inner tie rod for corrosion. Remove the boot and breather tube and install a new boot clamp and grease the assemblies and reassemble. Make sure that the components are aligned properly and secured.

OEM 2009 Cadillac DTS Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack and Pinion Boot found

View related parts
2009 Cadillac DTS Tie Rod Boot Part Number: 21011025
Product Specifications
- Other Name: Boot Kit, Steering Tie Rod; Power Steering Cylinder; Rack and Pinion Bellows Kit; Rack & Pinion Boot.; Inner Tie Rod Boot; Boot Kit; Boot; Boot Kit, Tie Rod End Dust
- Item Weight: 0.80 Pounds
- Item Dimensions: 12.0 x 4.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 21011025
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

2009 Cadillac DTS Rack and Pinion Boot

With a comprehensive array of OEM 2009 Cadillac DTS Rack and Pinion Boot, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac DTS Rack and Pinion Boot are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac DTS Rack and Pinion Boot Parts and Q&A

Q: How to replace the rack and pinion boot and breather tube on 2009 Cadillac DTS?
A: To change the rack and pinion boot and breather tube, remove the outer tie rod and the hexagon jam nut from the inner tie rod assembly. Inspect the inner tie rod for corrosion. Remove the boot and breather tube and install a new boot clamp and grease the assemblies and reassemble. Make sure that the components are aligned properly and secured.