How to replace the right side engine mount on 2009 Chevrolet Colorado?

The replacement of the right side engine mount begins by dismantling the wheel and tire. Start by removing the engine shield when it is equipped. A jack stand and wooden block should support the engine during this process. First remove the through bolt connecting the mount being replaced to its bracket before easing the left side through bolt. Use a jack stand to lift the engine before it tilts to one side for bolt removal from the engine mount. The mounting procedure might need some twist to complete its removal. Begin mount installation by articulating its position for installation and secure the engine mount bolts starting from position one and torque them to 50 Nm (37 lb ft). Lower the engine with assistance before installing the bracket through bolt and securing it at 85 Nm (63 lb ft). Finish the procedure by removing the engine stand while also reinstalling the engine shield (if present) before reinstalling the wheel and tire unit.

OEM 2009 Chevrolet Colorado Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Engine Mounts found

View related parts
2009 Chevrolet Colorado Front Mount
Part Number: 97287678
$82.91 MSRP: $129.88
You Save: $46.97 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Motor Mount; Mount, Engine Mounting; Mount, Engine
- Item Weight: 4.20 Pounds
- Item Dimensions: 8.1 x 7.3 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 97287678
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2009 Chevrolet Colorado Front Mount, Passenger Side
Part Number: 15925796
$70.92 MSRP: $111.09
You Save: $40.17 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Motor Mount; Mount, Engine Mounting; Mount, Engine
- Position: Passenger Side
- Replaces: 97287677
- Item Weight: 4.90 Pounds
- Item Dimensions: 7.9 x 7.3 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15925796
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2009 Chevrolet Colorado Rear Mount
Part Number: 15138532
$44.93 MSRP: $70.39
You Save: $25.46 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Engine Mount Bracket; Motor Mount; Mount
- Replaces: 15112152
- Item Weight: 2.70 Pounds
- Item Dimensions: 8.1 x 5.3 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15138532
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2009 Chevrolet Colorado Rear Mount
Part Number: 15171918
Product Specifications
- Other Name: Mount Assembly-Engine Rear; Engine Mount Bracket; Transmission Mount; Motor Mount; Mount; Mount, Transmission Mounting; Mount, Engine Mounting; Mount, Engine
- Position: Rear
- Item Weight: 4.10 Pounds
- Item Dimensions: 5.3 x 5.1 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15171918
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2009 Chevrolet Colorado Front Mount, Driver Side
Part Number: 15931529
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Motor Mount; Mount, Engine Mounting; Mount, Engine
- Position: Driver Side
- Item Weight: 9.80 Pounds
- Item Dimensions: 8.4 x 7.4 x 13.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15931529
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
- LT | 8 Cyl 5.3 L GAS
View related parts
2009 Chevrolet Colorado Front Mount, Passenger Side
Part Number: 15931530
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Motor Mount; Mount, Engine Mounting
- Position: Passenger Side
- Item Weight: 5.10 Pounds
- Item Dimensions: 8.3 x 7.1 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15931530
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
- LT | 8 Cyl 5.3 L GAS

2009 Chevrolet Colorado Engine Mount

With a comprehensive array of OEM 2009 Chevrolet Colorado Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Colorado Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Colorado Engine Mount Parts Questions & Experts Answers

Q: How to replace the right side engine mount on 2009 Chevrolet Colorado?
A: The replacement of the right side engine mount begins by dismantling the wheel and tire. Start by removing the engine shield when it is equipped. A jack stand and wooden block should support the engine during this process. First remove the through bolt connecting the mount being replaced to its bracket before easing the left side through bolt. Use a jack stand to lift the engine before it tilts to one side for bolt removal from the engine mount. The mounting procedure might need some twist to complete its removal. Begin mount installation by articulating its position for installation and secure the engine mount bolts starting from position one and torque them to 50 Nm (37 lb ft). Lower the engine with assistance before installing the bracket through bolt and securing it at 85 Nm (63 lb ft). Finish the procedure by removing the engine stand while also reinstalling the engine shield (if present) before reinstalling the wheel and tire unit.