How to replace the left side engine mount on 2008 Chevrolet Colorado?

Start the left side Engine Mount replacement by taking off the wheel together with tire assembly. Starting with engine shield removal proceed when such equipment exists. You must first uninstall the lower intermediate Steering Shaft. Forward the engine using a jack stand in addition to a block of wood. The technician should start by removing the Engine Mount-to-frame bracket through bolt from the target mount while also loosening the right side through bolt. Remove the heater pipe bracket bolt attached to the Engine Mount. Climb the engine with the jack stand until it leans to one side before removing the Engine Mount bolts to remove the Engine Mount that might need gentle positioning. Begin mounting the new Engine Mount by positioning it correctly before inserting the bolts starting with the first position while tightening them to 50 n.m (37 lb ft). End your work by lowering the engine before running the Engine Mount-to-frame bracket through bolt while tightening this fastener to 85 n.m (63 lb ft). The procedure to replace the engine requires reattaching the engine coolant pipe bracket bolt on the Engine Mount then taking away the jack stand before reinstalling the lower intermediate Steering Shaft. After putting the engine shield back if present the final step should be installing the wheel along with tire assembly.

OEM 2008 Chevrolet Colorado Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Engine Mounts found

View related parts
2008 Chevrolet Colorado Front Mount
Part Number: 97287678
$82.91 MSRP: $129.88
You Save: $46.97 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Motor Mount; Mount, Engine Mounting; Mount, Engine
- Item Weight: 4.20 Pounds
- Item Dimensions: 8.1 x 7.3 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 97287678
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 Chevrolet Colorado Front Mount, Passenger Side
Part Number: 15925796
$70.92 MSRP: $111.09
You Save: $40.17 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Motor Mount; Mount, Engine Mounting; Mount, Engine
- Position: Passenger Side
- Replaces: 97287677
- Item Weight: 4.90 Pounds
- Item Dimensions: 7.9 x 7.3 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15925796
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 Chevrolet Colorado Rear Mount
Part Number: 15138532
$44.93 MSRP: $70.39
You Save: $25.46 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Engine Mount Bracket; Motor Mount; Mount
- Replaces: 15112152
- Item Weight: 2.70 Pounds
- Item Dimensions: 8.1 x 5.3 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15138532
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2008 Chevrolet Colorado Rear Mount
Part Number: 15171918
Product Specifications
- Other Name: Mount Assembly-Engine Rear; Engine Mount Bracket; Transmission Mount; Motor Mount; Mount; Mount, Transmission Mounting; Mount, Engine Mounting; Mount, Engine
- Position: Rear
- Item Weight: 4.10 Pounds
- Item Dimensions: 5.3 x 5.1 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15171918
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2008 Chevrolet Colorado Engine Mount

With a comprehensive array of OEM 2008 Chevrolet Colorado Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Colorado Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Colorado Engine Mount Parts Questions & Experts Answers

Q: How to replace the left side engine mount on 2008 Chevrolet Colorado?
A: Start the left side Engine Mount replacement by taking off the wheel together with tire assembly. Starting with engine shield removal proceed when such equipment exists. You must first uninstall the lower intermediate Steering Shaft. Forward the engine using a jack stand in addition to a block of wood. The technician should start by removing the Engine Mount-to-frame bracket through bolt from the target mount while also loosening the right side through bolt. Remove the heater pipe bracket bolt attached to the Engine Mount. Climb the engine with the jack stand until it leans to one side before removing the Engine Mount bolts to remove the Engine Mount that might need gentle positioning. Begin mounting the new Engine Mount by positioning it correctly before inserting the bolts starting with the first position while tightening them to 50 n.m (37 lb ft). End your work by lowering the engine before running the Engine Mount-to-frame bracket through bolt while tightening this fastener to 85 n.m (63 lb ft). The procedure to replace the engine requires reattaching the engine coolant pipe bracket bolt on the Engine Mount then taking away the jack stand before reinstalling the lower intermediate Steering Shaft. After putting the engine shield back if present the final step should be installing the wheel along with tire assembly.