How to Replace the Motor and Transmission Mount for RPO Z85 and ZQ8 on 2009 Chevrolet Colorado?

Replace the transmission mount for rpo z85 and zq8, firstly, raising and supporting the vehicle. Lift the transmission with a transmission jack and pull it upward, as you remove two nuts holding the transmision mount to the transmission support. Lift off the transmission from the support and remove mount to transmission bolts. After that, the new transmission mount should be attached to vehicle and be sure to attach the transmission mount to transmission bolts and tighten it to 55 nm (41 lb ft). Reduce the transmission and fix it using the two nuts and tighten to the transmission support to 57 nm (42 lb ft). Finally, pull out the transmission jack and drop the vehicle.

OEM 2009 Chevrolet Colorado Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Motor And Transmission Mounts found

View related parts
2009 Chevrolet Colorado Front Mount
Part Number: 97287678
$75.63 MSRP: $129.87
You Save: $54.24 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Motor Mount; Mount, Engine Mounting; Mount, Engine
- Item Weight: 4.20 Pounds
- Item Dimensions: 8.1 x 7.3 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 97287678
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2009 Chevrolet Colorado Front Mount, Passenger Side
Part Number: 15925796
$54.85 MSRP: $111.10
You Save: $56.25 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount; Engine Mount Bracket; Motor Mount; Mount, Engine Mounting; Mount, Engine
- Position: Passenger Side
- Replaces: 97287677
- Item Weight: 4.90 Pounds
- Item Dimensions: 7.9 x 7.3 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15925796
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2009 Chevrolet Colorado Rear Mount
Part Number: 15138532
$40.98 MSRP: $70.40
You Save: $29.42 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mount, Transmission Mounting; Engine Mount Bracket; Motor Mount; Mount
- Replaces: 15112152
- Item Weight: 2.70 Pounds
- Item Dimensions: 8.1 x 5.3 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15138532
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2009 Chevrolet Colorado Rear Mount
Part Number: 15171918
Product Specifications
- Other Name: Mount Assembly-Engine Rear; Engine Mount Bracket; Transmission Mount; Motor Mount; Mount; Mount, Transmission Mounting; Mount, Engine Mounting; Mount, Engine
- Position: Rear
- Item Weight: 4.10 Pounds
- Item Dimensions: 5.3 x 5.1 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15171918
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
2009 Chevrolet Colorado Front Mount, Driver Side
Part Number: 15931529
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Motor Mount; Mount, Engine Mounting; Mount, Engine
- Position: Driver Side
- Item Weight: 9.80 Pounds
- Item Dimensions: 8.4 x 7.4 x 13.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15931529
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
- LT | 8 Cyl 5.3 L GAS
View related parts
2009 Chevrolet Colorado Front Mount, Passenger Side
Part Number: 15931530
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Motor Mount; Mount, Engine Mounting
- Position: Passenger Side
- Item Weight: 5.10 Pounds
- Item Dimensions: 8.3 x 7.1 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15931530
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
- LT | 8 Cyl 5.3 L GAS
View related parts
2009 Chevrolet Colorado Transmission Mount, Rear
Part Number: 15931534
Product Specifications
- Other Name: Mount Assembly-Engine Rear; Transfer Case Mount; Mount, Transmission Mounting
- Position: Rear
- Item Weight: 4.00 Pounds
- Item Dimensions: 8.2 x 6.1 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15931534
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
- LT | 8 Cyl 5.3 L GAS

2009 Chevrolet Colorado Motor And Transmission Mount

With a comprehensive array of OEM 2009 Chevrolet Colorado Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Colorado Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Colorado Motor And Transmission Mount Parts Questions & Experts Answers

Q: How to Replace the Motor and Transmission Mount for RPO Z85 and ZQ8 on 2009 Chevrolet Colorado?
A: Replace the transmission mount for rpo z85 and zq8, firstly, raising and supporting the vehicle. Lift the transmission with a transmission jack and pull it upward, as you remove two nuts holding the transmision mount to the transmission support. Lift off the transmission from the support and remove mount to transmission bolts. After that, the new transmission mount should be attached to vehicle and be sure to attach the transmission mount to transmission bolts and tighten it to 55 nm (41 lb ft). Reduce the transmission and fix it using the two nuts and tighten to the transmission support to 57 nm (42 lb ft). Finally, pull out the transmission jack and drop the vehicle.