How to replace the ABS Control Module on 2009 Chevrolet Malibu?

One must begin the ABS Control Module (ABSCM) replacement by making sure the ignition switch is switched to OFF to safeguard against ABSCM/EBTCM damage. Clear the ABSCM operating area and brake pressure modulator valve region from all dirt accumulation and debris. Disconnect the electrical connector from the ABSCM before taking out the 4 ABSCM bolts that will allow you to separate the ABSCM carefully from the BPMV. The BPMV needs to receive a clean with both denatured alcohol and a shop cloth before the ABSCM gets installed onto the BPMV. Tighten the 4 ABSCM bolts across the pattern in a crisscross method to 3 Nm (27 lb in). Check that the ABSCM electrical connector fits well into the module before you lock down the lever to avoid communication problems. The electrical connector needs connection to the ABSCM after installation and the ABSCM requires programming if a new unit is installed.

OEM 2009 Chevrolet Malibu ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 ABS Control Modules found

View related parts
2009 Chevrolet Malibu Control Module
Part Number: 15952670
$360.65 MSRP: $691.82
You Save: $331.17 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Electronic Brake Control; ABS Control Module; Module, Electronic Brake Control
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.2 x 6.2 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15952670
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2009 Chevrolet Malibu Control Module
Part Number: 15952669
$324.50 MSRP: $689.08
You Save: $364.58 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Electronic Brake Control; ABS Control Module; Module, Electronic Brake Control
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.4 x 6.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15952669
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2009 Chevrolet Malibu Pressure Valve
Part Number: 25818715
Product Specifications
- Other Name: Valve, Electronic Brake Control; ABS Control Module; Modulator Valve; Modulator
- Item Weight: 6.40 Pounds
- Item Dimensions: 9.5 x 8.5 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25818715
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2009 Chevrolet Malibu Control Module
Part Number: 25914148
Product Specifications
- Other Name: Module, Electronic Brake Control; ABS Control Module
- Item Weight: 1.30 Pounds
- Item Dimensions: 7.8 x 6.3 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25914148
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
2009 Chevrolet Malibu Pressure Valve
Part Number: 25818716
$240.42 MSRP: $431.21
You Save: $190.79 (45%)
Product Specifications
- Other Name: Valve, Electronic Brake Control; ABS Control Module; Modulator Valve; Modulator
- Item Weight: 5.50 Pounds
- Item Dimensions: 8.4 x 6.1 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25818716
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2009 Chevrolet Malibu ABS Control Module

With a comprehensive array of OEM 2009 Chevrolet Malibu ABS Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Malibu ABS Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Malibu Parts Questions & Experts Answers

Q: How to replace the ABS Control Module on 2009 Chevrolet Malibu?
A: One must begin the ABS Control Module (ABSCM) replacement by making sure the ignition switch is switched to OFF to safeguard against ABSCM/EBTCM damage. Clear the ABSCM operating area and brake pressure modulator valve region from all dirt accumulation and debris. Disconnect the electrical connector from the ABSCM before taking out the 4 ABSCM bolts that will allow you to separate the ABSCM carefully from the BPMV. The BPMV needs to receive a clean with both denatured alcohol and a shop cloth before the ABSCM gets installed onto the BPMV. Tighten the 4 ABSCM bolts across the pattern in a crisscross method to 3 Nm (27 lb in). Check that the ABSCM electrical connector fits well into the module before you lock down the lever to avoid communication problems. The electrical connector needs connection to the ABSCM after installation and the ABSCM requires programming if a new unit is installed.