How to replace the steering knuckle on 2009 Chevrolet Silverado 1500?

The first step to replace a Steering Knuckle requires a vehicle lift and vehicle support. First remove the wheel and tire followed by removal of the wheel drive shaft when present. First disconnect the Wheel Bearing and hub assembly followed by unscrewing the outer Tie Rod End from the knuckle. The process starts with separate control arms from the knuckle before extracting the knuckle from the vehicle. Start by placing the lower Ball Joint into the knuckle and then position the upper Ball Joint afterwards. The installation involves putting the outer Tie Rod End into the knuckle before reassembling the Wheel Bearing and hub assembly. After installing the wheel drive shaft you should replace the tire and wheel on the vehicle. After support removal and wheel lowering check the vehicle's wheel alignment.

OEM 2009 Chevrolet Silverado 1500 Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2009 Chevrolet Silverado 1500 Knuckle, Driver Side Part Number: 22912208
$306.71 MSRP: $490.06
You Save: $183.35 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 15942236, 15125944
- Item Weight: 19.30 Pounds
- Item Dimensions: 14.4 x 14.4 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22912208
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2009 Chevrolet Silverado 1500 Knuckle, Passenger Side Part Number: 22912209
$282.59 MSRP: $458.62
You Save: $176.03 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 15125945, 15942237
- Item Weight: 17.50 Pounds
- Item Dimensions: 6.5 x 13.4 x 13.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22912209
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX

2009 Chevrolet Silverado 1500 Steering Knuckle

With a comprehensive array of OEM 2009 Chevrolet Silverado 1500 Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Silverado 1500 Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Silverado 1500 Steering Knuckle Parts and Q&A

Q: How to replace the steering knuckle on 2009 Chevrolet Silverado 1500?
A: The first step to replace a Steering Knuckle requires a vehicle lift and vehicle support. First remove the wheel and tire followed by removal of the wheel drive shaft when present. First disconnect the Wheel Bearing and hub assembly followed by unscrewing the outer Tie Rod End from the knuckle. The process starts with separate control arms from the knuckle before extracting the knuckle from the vehicle. Start by placing the lower Ball Joint into the knuckle and then position the upper Ball Joint afterwards. The installation involves putting the outer Tie Rod End into the knuckle before reassembling the Wheel Bearing and hub assembly. After installing the wheel drive shaft you should replace the tire and wheel on the vehicle. After support removal and wheel lowering check the vehicle's wheel alignment.