How to replace the steering knuckle on 2008 Chevrolet Silverado 1500?

First, before proceeding with the removal, raise and support the vehicle. Remove the tire and also the wheel, then slide out the wheel drive shaft if it is available. Next, pull off the Wheel Bearing and hub assembly followed by the removal of the outer Tie Rod End from the knuckle. Disassemble the upper Control Arm and the lower Control Arm from the knuckle; then, take the knuckle off the vehicle. To install, start by installing the lower Ball Joint to the knuckle followed by the upper Ball Joint. Reinstall the outer Tie Rod End to knuckle, and alike, install the hub assembly and the Wheel Bearing. If available, install the wheel drive shaft, and apply tire and wheel. Lastly, remove the support, drop the car, and check the alignment of the wheels.

OEM 2008 Chevrolet Silverado 1500 Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

View related parts
2008 Chevrolet Silverado 1500 Knuckle, Driver Side
Part Number: 22912208
$306.71 MSRP: $490.06
You Save: $183.35 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 15942236, 15125944
- Item Weight: 19.30 Pounds
- Item Dimensions: 14.4 x 14.4 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22912208
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2008 Chevrolet Silverado 1500 Knuckle, Passenger Side
Part Number: 22912209
$287.03 MSRP: $458.62
You Save: $171.59 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 15125945, 15942237
- Item Weight: 17.50 Pounds
- Item Dimensions: 6.5 x 13.4 x 13.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22912209
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX

2008 Chevrolet Silverado 1500 Steering Knuckle

With a comprehensive array of OEM 2008 Chevrolet Silverado 1500 Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Silverado 1500 Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Silverado 1500 Parts Questions & Experts Answers

Q: How to replace the steering knuckle on 2008 Chevrolet Silverado 1500?
A: First, before proceeding with the removal, raise and support the vehicle. Remove the tire and also the wheel, then slide out the wheel drive shaft if it is available. Next, pull off the Wheel Bearing and hub assembly followed by the removal of the outer Tie Rod End from the knuckle. Disassemble the upper Control Arm and the lower Control Arm from the knuckle; then, take the knuckle off the vehicle. To install, start by installing the lower Ball Joint to the knuckle followed by the upper Ball Joint. Reinstall the outer Tie Rod End to knuckle, and alike, install the hub assembly and the Wheel Bearing. If available, install the wheel drive shaft, and apply tire and wheel. Lastly, remove the support, drop the car, and check the alignment of the wheels.