How to replace the steering knuckle (1500) on 2007 Chevrolet Silverado 1500?

In order to replace the Steering Knuckle (1500), firstly you will have to raise and support the vehicle and take out the tire and wheel. If available, then remove the wheel drive shaft, followed by the Wheel Bearing and hub assembly. Next disconnect the outer Tie Rod End from the knuckle, take apart the upper Control Arm from knuckle and remove it from the automobile. For installation, start by the lower Ball Joint on the knuckle and proceeded by the upper Ball Joint and the outer tie rod ends. Replace the Wheel Bearing and hub assembly, the wheel drive shaft (if available) and the tire and wheel. After you have taken off the support, lower the vehicle and check for an allowed wheel alignment.

OEM 2007 Chevrolet Silverado 1500 Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Steering Knuckles found

View related parts
2007 Chevrolet Silverado 1500 Knuckle, Driver Side Part Number: 22912208
$306.71 MSRP: $490.06
You Save: $183.35 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 15942236, 15125944
- Item Weight: 19.30 Pounds
- Item Dimensions: 14.4 x 14.4 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22912208
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2007 Chevrolet Silverado 1500 Knuckle, Passenger Side Part Number: 22912209
$282.59 MSRP: $458.62
You Save: $176.03 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 15125945, 15942237
- Item Weight: 17.50 Pounds
- Item Dimensions: 6.5 x 13.4 x 13.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22912209
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Submodels:
- Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2007 Chevrolet Silverado 1500 Knuckle, Passenger Side Part Number: 25850471
$329.06 MSRP: $525.78
You Save: $196.72 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle Assembly-Steering; Knuckle, Steering
- Position: Passenger Side
- Replaces: 18079494, 18060909
- Item Weight: 20.00 Pounds
- Item Dimensions: 14.7 x 11.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25850471
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Submodels:
- Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 Chevrolet Silverado 1500 Knuckle, Passenger Side Part Number: 19257047
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 18048229, 18060556
- Item Weight: 17.80 Pounds
- Item Dimensions: 16.7 x 16.4 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19257047
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Submodels:
- Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 Chevrolet Silverado 1500 Knuckle, Driver Side Part Number: 25850470
$334.15 MSRP: $525.78
You Save: $191.63 (37%)
Product Specifications
- Other Name: Knuckle Assembly-Steering; Knuckle, Steering
- Position: Driver Side
- Replaces: 18060908, 18079493
- Item Weight: 20.30 Pounds
- Item Dimensions: 6.7 x 15.4 x 11.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25850470
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Submodels:
- Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2007 Chevrolet Silverado 1500 Knuckle, Driver Side Part Number: 19257048
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 18048228, 18060555
- Item Weight: 17.30 Pounds
- Item Dimensions: 14.0 x 14.0 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19257048
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Silverado 1500 Submodels:
- Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2007 Chevrolet Silverado 1500 Steering Knuckle

With a comprehensive array of OEM 2007 Chevrolet Silverado 1500 Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Silverado 1500 Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Silverado 1500 Steering Knuckle Parts and Q&A

Q: How to replace the steering knuckle (1500) on 2007 Chevrolet Silverado 1500?
A: In order to replace the Steering Knuckle (1500), firstly you will have to raise and support the vehicle and take out the tire and wheel. If available, then remove the wheel drive shaft, followed by the Wheel Bearing and hub assembly. Next disconnect the outer Tie Rod End from the knuckle, take apart the upper Control Arm from knuckle and remove it from the automobile. For installation, start by the lower Ball Joint on the knuckle and proceeded by the upper Ball Joint and the outer tie rod ends. Replace the Wheel Bearing and hub assembly, the wheel drive shaft (if available) and the tire and wheel. After you have taken off the support, lower the vehicle and check for an allowed wheel alignment.