How to replace the rear Parking Assist Distance Sensor on 2009 Chevrolet Tahoe?

In order to change the rear object sensor, remove the backing bumper fascia and also disconnect the electrical connector. Pull up the tabs that are used to lock the sensor out. During installation of the new sensor, do not have too much paint accumulation. Install the sensor, wire the connector and replace the rear bumper fascia.

OEM 2009 Chevrolet Tahoe Parking Assist Distance Sensor

Parking Assist Distance Sensor Guide

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Parking Assist Distance Sensor found

View related parts
2009 Chevrolet Tahoe Parking Sensor Part Number: 15239247
$171.30 MSRP: $256.10
You Save: $84.80 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Theft Deterrent Or Front/Rear/Side Object; Parking Aid Sensor; Ultrasonic Sensor; Parking Sensors; Reverse Sensor; Alarm; Sensor Kit, Theft Deterrent for Front/Rear/Side Objects; Front and Rear Bumper/Fascia.
- Position: Rear
- Replaces: 19116085
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.9 x 2.3 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15239247
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Tahoe Submodels:
- Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2009 Chevrolet Tahoe Parking Assist Distance Sensor

With a comprehensive array of OEM 2009 Chevrolet Tahoe Parking Assist Distance Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Tahoe Parking Assist Distance Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Tahoe Parking Assist Distance Sensor Parts and Q&A

Q: How to replace the rear Parking Assist Distance Sensor on 2009 Chevrolet Tahoe?
A: In order to change the rear object sensor, remove the backing bumper fascia and also disconnect the electrical connector. Pull up the tabs that are used to lock the sensor out. During installation of the new sensor, do not have too much paint accumulation. Install the sensor, wire the connector and replace the rear bumper fascia.